[PCB_FORUM] Re: How to slow down mmb panning
- From: "Crittenden, Mike" <mike.crittenden@xxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 16 Jan 2008 10:28:47 -0600
Side topic. How many have upgraded to 16.01 using windows vista os or
XP and are happy with the performance and stability of allegro? We are
still using 15.7 but a number of our engineers are getting new pc's with
the vista os. We never upgraded to 16.0 because of all of the problems
I heard about. Just curious.
Mike Crittenden
Phase IV Systems, Inc.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Cosentino, Tony
Sent: Wednesday, January 16, 2008 10:16 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to slow down mmb panning
Les,
You can try going into Setup / User Preferences / Roam. Use setting
"pcb_autoroam". The best results I get is when I leave the field blank.
Thanks
Tony Cosentino
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Les Wong
Sent: Wednesday, January 16, 2008 10:14 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to slow down mmb panning
Hi All:
We are starting to use Allegro 16.1
We have a couple of users that when they pan with the mmb,
the image moves too fast to pan to a specific area.
Does any one know how to control this panning speed ?
Thanks,
Les
Other related posts:
