Seiji,
if you use orcad capture and allegro, you can backannotate directly in
capture.
It works fine.
In capture, select your dsn, Tools-> Backannotate
Jean-Charles
arimitsu seiji a écrit :
Hi Moris,
Thank you for the reply. Is this format something I can back
annotate into OrCAD? The format is different than what I am use to.
Also does this method work for function swaps between two
different connectors? I wasn't able to back annotate the swaps made
between two different connector the way I did in the past either.
I will be trying to figure things out. If you have any solutions
please let me know. I appreaciate your help.
Thank you,
Seiji
From: "Ruso, Moris / Miga-Cad
Ltd." <moris@xxxxxxxxxxx>
Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: How to output a Pin/function Swap list.
Date: Tue, 19 Dec 2006 08:46:18 +0200
I use the [i] button and
select Comps from the palette, and select the BGA I want to output the
swap list.
I do it once for the old and once for the new and import them to the
excel to form a PIN# | OLD | NEW style worksheet. It takes only 2-3
minutes , fast and efficient.
regards,
Moris
arimitsu seiji wrote:
Hi All,
�
I am back again with more questions.
�
We have a little program that gives us pin swap
list most/some of the time no problem by comparing board before and
after pinswap.� Only problem is it's most/some of the time only and we
have to do lots of fiddling to get the data to output.� Is there a
skill or some sort of report that Allegro outputs that gives us the
pin/function swap list?�
�
Thank you in advance for all the help.
Seiji
----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe To view the archives of this
list go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
#####################################################################################
This Mail Was Scanned by 012.net AntiVirus Service2- Powered by TrendMicro
Interscan
----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
|