[PCB_FORUM] Help!!! Segment with same start and end points
- From: "Van Huynh (huynh)" <huynh@xxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Sat, 18 Dec 2004 09:37:24 -0800
I got a lots of these warning on every artwork layers,
Any one know how to fix these errors message?
WARNING: Segment with same start and end points at
(75.2869 -194448.6314) will be ignored. Increasing output
accuracy may allow segment to be generated.
My artwork parameter setup:
DEVICE-TYPE GERBER_RS274X
OUTPUT-UNITS INCHES
FILM-SIZE 240000 160000
FORMAT 2.5
ABORT-ON-ERROR NO
SCALE 1
SUPPRESS-LEAD-ZEROES YES
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUAL YES
UNDEF-APT-CONT NO
NC Drill format is 2.5
Drawing parameter accuracy is 4
Thank you
Van Huynh
Other related posts:
