[PCB_FORUM] Re: Flash Symbol
- From: "Dharma Kemp-Bresett" <dharma@xxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 22 Jul 2009 16:07:08 -0400
Hi Shirley,
I agree but unless I just don't know about it this is the only option we
have for now.... Anybody willing/able to prove me wrong I would be VERY
happy to hear it. As would Shirley, I am assuming... :-)
Thanks,
Dharma
KAW/USA Ltd.
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax
Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.
_____
From: Bradley, Shirley [mailto:shirley.bradley@xxxxxxxxxxxx]
Sent: Wednesday, July 22, 2009 4:00 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Flash Symbol
This is similar to what I did. Made it for the smallest dimension, pulled it
apart for the long dimension and stretched the sides. If Cadence made it
easy to make a round flash and it is easy to make an oval pad, they should
have an easy way to make the oval flash.
Thanks for your answer.
Shirley M. Bradley
Intermec
tel: 319.369.3328
shirley.bradley@xxxxxxxxxxxx
_____
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dharma Kemp-Bresett
Sent: Wednesday, July 22, 2009 2:51 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Flash Symbol
Hi Shirley,
Yes, Build a normal flash to the size of your smallest dimension then open
it as a symbol .dra and then separate the two "sides" and stretch (extend)
the long sides by the difference between your shortest and longest
dimensions. If this "quick and dirty" response is confusing to you ( and I
admit it might be) reply to me offline and I can give you more detailed
info.
Thanks,
Dharma
KAW/USA Ltd.
39 Simon Street, #4
Nashua, NH 03060
603-886-8711 x212
603-881-8763 fax
Confidentiality Notice: This email and any accompanying documents contain
information that is confidential, privileged or exempt from disclosure under
applicable law and is intended for the exclusive use of the addressee. This
information is private and protected by law. If you are not the intended
recipient, or have received this email in error, you are hereby notified
that any disclosure, copying, distribution or use of the contents of this
document in any manner is strictly prohibited.
_____
From: Bradley, Shirley [mailto:shirley.bradley@xxxxxxxxxxxx]
Sent: Wednesday, July 22, 2009 3:43 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Flash Symbol
Greetings,
Is there an easy way to make a flash symbol for an oval plated hole?
Thanks,
Shirley M. Bradley
Intermec
tel: 319.369.3328
shirley.bradley@xxxxxxxxxxxx
This message is intended only for the named recipient. If you are not the
intended recipient, you are notified that disclosing, copying, distributing
or taking any action based on the contents of this information is strictly
prohibited.
This message is intended only for the named recipient. If you are not the
intended recipient, you are notified that disclosing, copying, distributing
or taking any action based on the contents of this information is strictly
prohibited.
Other related posts:
