[PCB_FORUM] Re: Fabmaster
- From: "Andrew Noonan" <andrew@xxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 26 Apr 2005 13:04:46 -0700
Hi Ed,
Yes, Fabmaster can generate output from 15.2, though the tool must be
slightly reconfigured to look at the 15.2 'extracta.exe file instead of
the 14.2 version.
Do you have the windows version? If so, start the program, click
File>Configure and Browse to the Extraction Tool in the 15.2 directory.
Andrew Noonan
Sr. PCB Designer
Topspin Communications
(w)650-316-3398
(c)650-814-3677
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Ed Caldwell
Sent: Tuesday, April 26, 2005 12:33 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Fabmaster
Does anyone know if a Fabmaster file can be generated from Allegro 15.2
- EMA says no.
Thanks,
Ed
Other related posts:
