Kevin, I think this has a two-fold answer. The first reason to use negative planes is the gerber file is much smaller; hence easier for electronic transport. Secondly, if the positive dynamic shape works so well (which it does), why wouldn't the negative shape work as well? It would be better if it didn't work at all rather than the intermittent behavior it now exhibits. I think Cadence should be able to answer it. Regards, Ron Scott Texas Instruments Tel: 214.480.4715 Cell: 972.816.7978 rg-scott@xxxxxx -----Original Message----- From: Kevin McCowan [mailto:kmccowan@xxxxxxxxxxxxxx] Sent: Friday, August 06, 2004 12:34 To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Dynamic Shapes-15.1 I, personally, am really happy with the dynamic planes. I have had very few (virtually none) problems that have not turned out to be some dumb "I didn't know" problem on my part. I especially like the properties that allow me to tailor individual pins and stuff to get special spacing, line widths and all the other stuff it lets me do. And it seems very fast to respond to the changes. Of course, I only use positive plane layers to generate my plane data. Why don't you? What do you gain by using negative plane layers? Kevin McCowan Sr. PCB Designer TSI Telsys Scott, Ron wrote: > All, > > While the dynamic shapes are really cool, they also seem to be > inconsistent on negative plane layers. The particular application is > power plane splits. Sometimes the dynamic feature will work and > sometimes not. Most of the time I have to do a manual void on negative > planes. Has anyone encountered this problem in 15.1? > > Regards, > > Ron Scott > Sr. PCB Designer > Texas Instruments > Tel: 214.480.4715 > Cell: 972.816.7978 > rg-scott@xxxxxx > > > ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx -----------------------------------------------------------