Tried that. It didn't work. Mike Golding \ mike.golding@xxxxxxxxxx PCB Designer \ +1-920-969-6114 Phone Plexus Technology Group \ +1-920-428-3280 Cell 55 Jewelers Park Drive \ +1-920-751-5366 Fax Neenah, WI 54957 \ www.plexus.com -----Original Message----- From: Gerry Meier [mailto:gerry.meier@xxxxxxxxxxxxxx] Sent: Wednesday, January 05, 2005 1:09 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Custom Smooth Set your DRC mode for prop delay or relative prop delay to off - run smooth and turn DRC mode back. See if it works - I don't have time to try it right now. Regards, Gerry Gerry Meier Sr. PCB Designer Freedom CAD Services, Inc. Voice: (603) 864-1300 x1350 Alt. Voice: (386) 753-0048 Email: gerry.meier@xxxxxxxxxxxxxx visit our website at<http://www.freedomcad.com <http://www.freedomcad.com/> _____ From: Mike Golding [mailto:Mike.Golding@xxxxxxxxxx] Sent: Wednesday, January 05, 2005 2:05 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Custom Smooth When a net has a prop delay it will not let you custom smooth. Is there a way to shut this off for a brief period? I'm routing a bus that I'd like to smooth before I start matching.