It never is...J Jean Bratton Senior PCB Designer Freedom CAD Services, Inc. Office: 603-864-1349 Email: jean.bratton@xxxxxxxxxxxxxx Visit us at http://www.freedomcad.com From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg Sent: Monday, July 27, 2009 9:46 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Allegro Sub drawing / Via stitch problem Not quite that easy Jean, Actually stitching to many different power supplies on 8 different layers. Just want to keep the import the same as the export. Importing clip all at once by 0,0 origin. Jean Bratton wrote: IF all of your stitching vias are to GND, then you can move all of your non-GND positive planes off-board before reading in the clip. Then the unconnected vias will get associated with GND, and then you can move the other planes back on the board. Jean Bratton Senior PCB Designer Freedom CAD Services, Inc. Office: 603-864-1349 Email: jean.bratton@xxxxxxxxxxxxxx Visit us at http://www.freedomcad.com -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg Sent: Monday, July 27, 2009 9:04 AM To: Cadence User Group Subject: [PCB_FORUM] Allegro Sub drawing / Via stitch problem Hello all, When Exporting a Sub-Drawing I found that any vias in a shape used for stitching...connected to a shape, but has no traces to a pin...looses connectivity and sometimes connect to a different plane after import sub-drawing. The only way I have found to fix it is to ALSO route a trace from a pin to the via to force the connection. Is there a way to locate any occurrences of this prior to exporting a Sub-Drawing? Thought maybe dangling wire reporting as dangling via...but a Dangling via is defined a a via with only one connection from a pin. These vias simply dropped in a shape for thermal reasons do not get flagged. Any thoughts as to how to find them in a design? Thanks, Mark ________________________________________________________________________ _____ Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com ________________________________________________________________________ _____ ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ________________________________________________________________________ _____ Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com ________________________________________________________________________ _____ ________________________________________________________________________ _____ Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com ________________________________________________________________________ _____