[PCB_FORUM] Re: 15.7 on Vista 32...
- From: "Austin Franklin" <allegrolist@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 10 Mar 2009 11:55:58 -0500
Hi Bill,
But...every time you reboot?
Regards,
Austin
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Bill Dempsey
Sent: Tuesday, March 10, 2009 10:08 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...
Yes. One time.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Tuesday, March 10, 2009 7:59 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...
Hi Bill,
So, in order to run Allegro, you have to go and manually run lmgrd?
Regards,
Austin
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Bill Dempsey
Sent: Monday, March 09, 2009 8:33 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...
Lmgrd is not run as a service (on my machine). It is an executable from
the command line or gui.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Monday, March 09, 2009 7:30 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...
Hi Bill,
I am able to get "lmhostid -flexid" to return the proper USB ID. I am
able to put the USB key on another machine modify the license file to point
to that other machine, and I can bring up PCB Editor that way. But I can't
the license "tools" on the Vista machine to work...yet.
What do you mean by "run as administrator" with respect to a service?
It is setup for an automatic startup. Hum. Let me look into that...
Thanks,
Austin
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Bill Dempsey
Sent: Monday, March 09, 2009 6:04 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...
Whatever version comes on the Cadence CD. I think it's 10.8.
Also, be sure to "run as administrator" (right click) when you start
lmgrd. The Aladdin drivers started right up.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Monday, March 09, 2009 5:55 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...
Hi Bill,
Any idea what version of the drivers?
Best Regards,
Austin
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Bill Dempsey
Sent: Monday, March 09, 2009 4:07 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...
I used the 15.7 lmgrd. I used the Aladdin drivers off of their
website. No issues.
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Monday, March 09, 2009 3:53 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...
Hi,
Someone else did report here that they had 15.7 running fine on
Vista...and that their installation used lmgrd. It would be good to know if
another version of lmgrd was used aside from the one that came with the
standard installation. Perhaps you're right about the need to use a later
version of the key driver. I hate this key stuff.
Regards,
Austin
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of fxf
Sent: Monday, March 09, 2009 1:11 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...
SPB 15.7 was not supported on Vista. You might try obtaining the
license server portion from the 16.0 release where Vista
is supported. If you license via dongles, you need Vista
compatible dongle drivers which are not present in the 15.7 install.
Austin Franklin wrote:
Hi Mike, In a standard, first time, Cadence installation, the
pcbenv directory path is created at "C:\pcbenv. UAC allows the
Cadence installer to create the directory, but UAC will prevent you
from changing any files in that directory. I do install the pcbenv
underneath a subdirectory, so I should be all setthere. Regards,
Austin -----------------------------------------------------------To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxxxxxx a subject of subscribe or
unsubscribe To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:Send
an email to
icu-pcb-forum-admins@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
----------------- ---------------------------------------------------------
-- To subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send
an email to
icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------
------------------
Other related posts:
