Robert,the manual says that disk-drive mode won't activate if any other application is running and that you should have the icon well cabled up to the pc before entering diskdrive mode. Hope this helps. ----- Original Message ----- From: "Robert Acosta" <boacosta@xxxxxxxxxxx>
To: <icon-discuss@xxxxxxxxxxxxx> Sent: Monday, June 18, 2007 4:00 PM Subject: [icon-discuss] Re: can't access drive after disk drive isgoing
Hey Pamela, Thanks for these great ideas. Bob----- Original Message ----- From: "PAMELA RADER" <PRADER@xxxxxxx>To: <icon-discuss@xxxxxxxxxxxxx> Sent: Monday, June 18, 2007 1:27 PM Subject: [icon-discuss] Re: can't access drive after disk drive isgoing Bob:Do you have any other USB devices connected? If so, try disconnecting them. Also, you could have a driver conflict, if using a network.Hope that helps. Otherwise, we'll have to solve this tomorrow, or perhaps one of the other listers can assist you before then.Pamela Rader, TECHNICAL SUPPORT American Printing House For The Blind 1839 Frankfort Ave. Louisville, KY 40206 PHONE: 1-800-223-1839, Ext. 307boacosta@xxxxxxxxxxx 06/18/07 04:09PM >>>Hi guys,When i try to copy material from clipboard into Icon, I insert my usb cableand then get disk drive going with a63. It says that disk drive is readybut i get no plinks from my computer. I go into my computer and cannot findthe Icon drive. Any ideas here are appreciated. Robert Acosta Helping Hands for the Blind boacosta@xxxxxxxxxxx www.helpinghands4theblind.org -- No virus found in this incoming message. Checked by AVG Free Edition.Version: 7.5.472 / Virus Database: 269.9.0/853 - Release Date: 6/18/2007 3:02 PM