[ibis-quality] Minutes from the 31 Jul 2007 ibis-quality meeting
- From: "Mike LaBonte \(milabont\)" <milabont@xxxxxxxxx>
- To: <ibis-quality@xxxxxxxxxxxxx>
- Date: Tue, 7 Aug 2007 10:02:26 -0400
Minutes from the 31 Jul 2007 ibis-quality meeting are attached.
Mike
Minutes, IBIS Quality Committee
31 Jul 2007
11-12 AM EST (8-9 AM PST)
ROLL CALL
Adam Tambone
Barry Katz, SiSoft
Benny Lazer
Benjamin P Silva
Bob Cox, Micron
* Bob Ross, Teraspeed Consulting Group
Brian Arsenault
* David Banas, Xilinx
Eckhard Lenski, Siemens
Eric Brock
Gregory R Edlund
Hazem Hegazy
John Figueroa
John Angulo, Mentor Graphics
Katja Koller, Siemens
Kevin Fisher
* Kim Helliwell, LSI Logic
Lance Wang, IOMethodology
Lynne Green
* Mike LaBonte, Cisco
Mike Mayer, SiSoft
* Moshiul Haque, Micron Technology
Peter LaFlamme
Radovan Vuletic, Qimonda
Robert Haller, Enterasys
* Roy Leventhal, Leventhal Design & Communications
Sherif Hammad, Mentor Graphics
Todd Westerhoff, SiSoft
Tom Dagostino, Teraspeed Consulting Group
Kazuyoshi Shoji, Hitachi
Sadahiro Nonoyama
Everyone in attendance marked by *
NOTE: "AR" = Action Required.
-----------------------MINUTES ---------------------------
Mike LaBonte conducted the meeting.
AR Review:
- Mike add David's text for 4.2.21, 4.2.23, 4.2.25 to IQ spec
- Mike forgot to include this.
- This is section 5 now
- TBD
- Mike insert Bob's 5.1.1 text into IQ spec
- Done
- Mike delete 5.1.2 from IQ spec
- Done
- Roy rewrite 5.1.7
- Done
- Mike send draft 1.1u IQ spec to Roy
- Done
- Mike rewrite 5.1.8
- Done
New items:
- Roy's report to IEEE is on the IBIS website
- The file is in /pubs/docs but no web page points to it.
Continued review of IQ specification:
5.1.7. {LEVEL 2} [Temperature Range] is reasonable
- This was recently updated by Roy
- Slight correction: curly brace
- David asked why max temp is 100, not 85
- ibischk will be silent if [Temperature Range] is missing
- IBIS spec requires keyword if not default, but this can not be checked
- IBIS spec has:
| Required: Yes, if other than the preferred 0, 50, 100 degree Celsius
| range
- Discussion of "default" is distracting.
- Die vs. ambient temperature:
- Some model makers do not know the die temperature
- Mike: min and max might be within safe limits (derated).
Next meeting:
07 Aug 2007
11-12 AM EST (8-9 AM PST)
Phone: 1.877.384.0543 or 1.800.743.7560
Passcode: 90437837
Meeting ended at 12:04 PM Eastern Time.
Other related posts:
- » [ibis-quality] Minutes from the 31 Jul 2007 ibis-quality meeting
