All,
I am also doing a complete read-through, but will follow up with some more
comments after the meeting.
However, [Begin EMD] on page 9 should be moved above [Manufacturer] on page
8 since both [Manufacturer] and [Description] are within the [Begin
EMD]/[END EMD] scope.
Also, revise or correct the cut-and-paste error for [Description] (page 9):
Description: Provides a concise yet easily human-readable description of
what kind of interconnect the [EMD Set] [A1] <> represents. à
Description: Provides a concise yet easily human-readable description of
the content of [Define EMD].
For [Manufacturer] on page 18:
Description: Declares the manufacturer of the module that uses this .emd
file. à
Description: Declares the manufacturer of the [EMD Set].
Bob.
From: ibis-interconn-bounce@xxxxxxxxxxxxx
[mailto:ibis-interconn-bounce@xxxxxxxxxxxxx] On Behalf Of Randy Wolff
(Redacted sender "rrwolff" for DMARC)
Sent: Monday, September 21, 2020 4:30 PM
To: Mirmak, Michael; IBIS-Interconnect (ibis-interconn@xxxxxxxxxxxxx)
Subject: [ibis-interconn] Re: [EXT] BIRD202.1 Draft 25
I did another complete read-through. I added only comments in the attached
document. Some are quick edits and a few will require some discussion.
Michael, if you have time to take care of some of the quick edits, please
do.
Thanks,
Randy
From: ibis-interconn-bounce@xxxxxxxxxxxxx
<ibis-interconn-bounce@xxxxxxxxxxxxx> On Behalf Of Mirmak, Michael
Sent: Thursday, September 17, 2020 6:36 PM
To: IBIS-Interconnect (ibis-interconn@xxxxxxxxxxxxx)
<ibis-interconn@xxxxxxxxxxxxx>
Subject: [EXT] [ibis-interconn] BIRD202.1 Draft 25
Here is Draft 25 of the EMD BIRD proposal, now featuring the new 13.7
example text from Randy and Bob, plus new definition text for designators
and designator pins in section 12. Please check this to ensure previous
changes have been correctly captured.
Comments and questions are welcome. Thanks!
* MM
_____
[A1] <> Why do we say [EMD Set] here? We can have many EMD Sets in the
file, but only one [Begin EMD].
