On Mon, 4 Dec 2006, Väisänen Teemu wrote:I'll have a look at this on afternoon after we've had our meeting. I have to set up some real machines for IPv6 because I borked my vmware completely (or there is something weird in the latest version).
Hi. I didn't run it. Basically I'm testing HIP connection between two hosts as in the manual's chapter 6, but with ping6. -Teemu Väisänen 2006/12/4, Miika Komu <miika@xxxxxx>:On Mon, 4 Dec 2006, Väisänen Teemu wrote: So you did not run "hipconf hip nat on"? > Hi and thank you Miika for the answer. > > It might be the same, I'm not using any NAT or such, just two computer > connected to each other with a wire or WLAN. > > -Teemu Väisänen > > > > 2006/12/1, Miika Komu <miika@xxxxxx>: >> On Fri, 1 Dec 2006, Väisänen Teemu wrote: >> >> > Hi. >> > >> > Does anyone has an idea what could cause next error in the initiator > machine? >> > >> > debug(debug.c:566@hip_print_hit): Local address is given: >> > 4ffe:0000:0000:0000:0000:0000:0000:0005 >> > error(output.c:786@hip_send_udp): Local address is pure IPv6 address, >> > IPv6 address family is currently not supported on UDP/HIP. >> > error(output.c:350@hip_xmit_r1): Sending R1 packet on UDP failed. >> > debug(input.c:663@hip_receive_control_packet): Done with control >> > packet, err is -70. >> > >> > More logs are in: >> > http://www.ee.oulu.fi/~tuv/log/receiver.txt >> > http://www.ee.oulu.fi/~tuv/log/initiator.txt >> > >> > Thank you for any answers. >> >> Is it this one? >> >> https://infrahip.hiit.fi/bugzilla/show_bug.cgi?id=256 >> >> Unless Lauri has time to fix it, I will do i next week. >> >> -->> Miika Komuhttp://www.iki.fi/miika/>> > -- Miika Komu http://www.iki.fi/miika/
-- Miika Komu http://www.iki.fi/miika/