[haiku] Re: ralinkwifi driver RT2561/RT61 (irq issue)
- From: Peter Nadas <gif@xxxxxxx>
- To: haiku@xxxxxxxxxxxxx
- Date: Thu, 24 Feb 2011 00:06:08 +0100
> On Feb 21, 2011, at 11:36 AM, Colin Günther wrote:
>
>> it is pretty likely releated to ticket #5 as you pointed out already.
>> If you have some experience in getting irq-values with the help of linux and
>> hard-coding the irq for your wifi-card you wouldn't have to wait for it.
>> Have a look at http://dev.haiku-os.org/ticket/5511 where it is described in
>> more detail what I outlined here.
Just for the record: I installed ubuntu and checked /proc/interrupts, but the
driver doesn't load, it reports an error into syslog reporting that it can't
acquire irq 0.
So it seems that the same is happening in linux too. (btw I'm certain that I
was using wifi under an older version of ubuntu on this laptop)
I tried many kernel parameters: noapic, nolapic, pci=nomsi, acpi=off and their
combinations, nothing helped. And unfortunately, the rt2x00pci driver doesn't
have
an irq parameter to pass.
So I guess I'll try to hardcode the irq number into the Haiku driver and see
what happens.
cheers,
Peter
Other related posts:
