[haiku-development] Re: Nightly ARM builds now automated
- From: kallisti5 <kallisti5@xxxxxxxxxxx>
- To: haiku-development@xxxxxxxxxxxxx
- Date: Wed, 08 Feb 2017 14:32:55 -0600
On 8 Feb 2017, at 10:18, François Revol <revol@xxxxxxx> wrote:
On 08/02/2017 06:13, kallisti5 wrote:
I spent a little time tonight automating the nightly arm
builds and enhancing buildbot + haiku-files page generation
to support SD card images.
The arm builds currently target the Raspberry Pi 2.
http://download.haiku-os.org/nightly-images/arm/
The images are pretty small at ~3MB (just a minimal mmc
image for now)
Should be enough to try booting the kernel on the rpi2
and seeing some debug output over the serial console :-)
YAY!
Just when I answered people at FOSDEM that the ARM port needed some
love ;-)
On 2017-02-08 14:14, Josh Wright wrote:
I'd love to try this out as well - I'll even buy a separate Pi 3 for
the job. Could someone do a noob getting-started guide if none
already exists?
:-)
https://www.haiku-os.org/guides/building/compiling-arm
When you say _serial_ debug output, could you explain more? :)
http://pi4j.com/images/serial-example.png
Don't use the red wire and power the RaspberryPi over USB.
https://www.sparkfun.com/products/12977
Keep in mind nothing has really changed about our ARM port over the
last 8 months or so... I just automated building the 'nightly'
ARM images.
-- Alex
Other related posts:
