[haiku-bugs] [Haiku] #8362: atheroswifi & WPA2
- From: "erm67" <trac@xxxxxxxxxxxx>
- Date: Wed, 29 Feb 2012 15:56:20 -0000
#8362: atheroswifi & WPA2
--------------------------------+------------------------------
Reporter: erm67 | Owner: nobody
Type: bug | Status: new
Priority: normal | Milestone: R1
Component: Network & Internet | Version: R1/Development
Keywords: | Blocked By:
Blocking: | Has a Patch: 0
Platform: x86 |
--------------------------------+------------------------------
My only internet connection right now is through a WPA2 wireless link and
I cannot reconfigure it to use WEP so I must connect using WPA2.
I tried hard to make haiku connect but no way at the moment; I tried the
alpha first, than a nightly and now I am running a self compiled master
(hrev43804) (all gcc2 hybrids) but still no connection.
The first time I recompiled it I had added 'AddOptionalHaikuImagePackages
wpa_supplicant ;' to UserBuildConfig but even if wpa_supplicant was
installed in the system it did't worked, instead installing it using
installoptionalpackages once the system was installed it did work, don't
know why ...
Anyway, I have two wifi card available an intel ipw2200 and an atheros
AR922X, both are recognized (after installing the firmware for the
ipw2200) but I cannot connect. I'd prefer to use the atheros since it
works better, it is correctly recognized by haiku:
in the log:
{{{
KERN: atheroswifi: init_driver(0x813fdfa4)
KERN: [atheroswifi] (ath_pci) bus_alloc_resource(3, [16], 0x0, 0xffffffff,
0x1,0x2)
KERN: add_memory_type_range(2621, 0xdfdf0000, 0x20000, 0)
KERN: set MTRRs to:
KERN: mtrr: 0: base: 0xf0000, size: 0x1000, type: 0
KERN: mtrr: 1: base: 0x7f7d2000, size: 0x2000, type: 0
KERN: mtrr: 2: base: 0x7f7e0000, size: 0x20000, type: 0
KERN: mtrr: 3: base: 0xd0000000, size: 0x10000000, type: 0
KERN: mtrr: 4: base: 0xe0000000, size: 0x20000000, type: 0
KERN: mtrr: 5: base: 0x80000000, size: 0x80000000, type: 1
KERN: [atheroswifi] (ath_pci) bus_alloc_resource(1, [0], 0x0, 0xffffffff,
0x1,0x6)
KERN: if_initname(0x8227f300, ath_pci, 3)
KERN: [atheroswifi] atheroswifi: /dev/net/atheroswifi/0
KERN: ifmedia_add: Adding Entry...
KERN: Type: IEEE 802.11 Wireless Ethernet
KERN: Mode: autoselect
KERN: SubType: autoselect
KERN: ifmedia_add: Adding Entry...
KERN: Type: IEEE 802.11 Wireless Ethernet
KERN: Mode: autoselect
KERN: SubType: autoselect
KERN: SubType Option[0]: adhoc
KERN: ifmedia_add: Adding Entry...
KERN: Type: IEEE 802.11 Wireless Ethernet
KERN: Mode: autoselect
KERN: SubType: autoselect
KERN: SubType Option[0]: hostap
lots of messages like the last one ...
}}}
later:
{{{
KERN: ieee80211_sysctl_attach not implemented, yet.
KERN: [net/atheroswifi/0] 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
KERN: [net/atheroswifi/0] 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps
9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
KERN: [net/atheroswifi/0] 2T2R
KERN: [net/atheroswifi/0] 11ng MCS 20MHz
KERN: [net/atheroswifi/0] MCS 0-7: 6.5Mbps - 65Mbps
KERN: [net/atheroswifi/0] MCS 8-15: 13Mbps - 130Mbps
KERN: [net/atheroswifi/0] AR9280 mac 128.2 RF5133 phy 13.0
KERN: [net/atheroswifi/0] Use hw queue 1 for WME_AC_BE traffic
KERN: [net/atheroswifi/0] Use hw queue 0 for WME_AC_BK traffic
KERN: [net/atheroswifi/0] Use hw queue 2 for WME_AC_VI traffic
KERN: [netKERN: /atheroswifi/0] Use hw queue 3 for WME_AC_VO traffic
KERN: [net/atheroswifi/0] Use hw queue 8 for CAB traffic
KERN: [net/atheroswifi/0] Use hw queue 9 for beacons
KERN: [net/atheroswifi/0] using multicast key search
KERN: if_initname(0x8227f600, wlan, 3)
KERN: [atheroswifi] atheroswifi: /dev/net/atheroswifi/0
KERN: [net/atheroswifi/0] ieee80211_node_vattach: init 2 auth 12 run 20
probe 2
KERN: [net/atheroswifi/0] ieee80211_vap_attach: STA parent ath_pci flags
0x400c2008 flags_ext 0x2
KERN: [net/atheroswifi/0] ieee80211_alloc_node
0xcdd45000<f4:ec:38:ff:f9:3c> in station table
KERN: [net/atheroswifi/0] [f4:ec:38:ff:f9:3c] ieee80211_alloc_node:
inact_reload 2
KERN: ifmedia_add: Adding Entry...
KERN: Type: IEEE 802.11 Wireless Ethernet
}}}
There is one message about ieee80211_sysctl_attach not being implemented
but I don't know if it is related to the problem, anyway using the ipw2200
drives gives the same results.
listdev:
{{{
device Network controller [2|80|0]
vendor 168c: Atheros Communications Inc.
device 0029: AR922X Wireless Network Adapter
}}}
listimage:
{{{
994 /boot/system/add-ons/kernel/drivers/dev/net/atheroswifi
0x8133a000 0x813fd000 0 0
}}}
ifconfig:
{{{
/dev/net/atheroswifi/0
Hardware type: Ethernet, Address: none
Media type: Auto-select
inet addr: , Bcast: , Mask:
MTU: 1500, Metric: 0, broadcast link
Receive: 0 packets, 0 errors, 0 bytes, 0 mcasts, 0 dropped
Transmit: 0 packets, 0 errors, 0 bytes, 0 mcasts, 0 dropped
Collisions: 0
}}}
ifconfig /dev/net/atheroswifi/0 scan recognizes that a WPA2 link is
available
{{{
name address signal auth
casa 06:25:56:69:f5:c6 28 WPA2
}}}
When I try to activate the network the popup asking the password appears,
I guess it is from wpa_supplicant since it didn't worked when
wpa_supplicant was not correctly installed, but after a few second in
'configuring' the network doesn't work.
The log shows that DHCP is trying to configure the network but it gets no
answer:
{{{
DAEMON 'DHCP': /dev/net/atheroswifi/0: Send DHCP_DISCOVER to
255.255.255.255:67
KERN: [net/atheroswifi/0] compat_open(0x2)
KERN: [net/atheroswifi/0] ieee80211_init
KERN: [net/atheroswifi/0] start running, 0 vaps running
KERN: [net/atheroswifi/0] ieee80211_start_locked: up parent ath_pci
KERN: ifmedia_ioctl: no media found for 0x20
KERN: [net/atheroswifi/0] start running, 1 vaps running
KERN: /dev/net/atheroswifi/0: media change, media 0x200a0 quality 1000
speed 1000000000
KERN: [net/atheroswifi/0] start running, 1 vaps running
KERN: [net/atheroswifi/0] ieee80211_new_state_locked: INIT -> SCAN
(nrunning 0 nscanning 0)
KERN: [net/atheroswifi/0] ieee80211_newstate_cb: INIT -> SCAN arg 0
KERN: [net/atheroswifi/0] sta_newstate: INIT -> SCAN (0)
KERN: [net/atheroswifi/0] ieee80211_check_scan: active scan, append
KERN: [net/atheroswifi/0] scan_update_locked: current scanner is
<none:none>, switch to <wlan:STA>
KERN: [net/atheroswifi/0] start_scan_locked: active scan, duration
2147483647 mindwell 0 maxdwell 0, desired mode auto, flush
KERN: [net/atheroswifi/0] scan set 1g, 6g, 11g, 7g, 13g, 2g, 3g, 4g, 5g,
8g, 9g, 10g, 12g dwell min 20ms max 0ms
KERN: [net/atheroswifi/0] scan_task: chan 1b -> 1g [active, dwell min
20ms max 0ms]
KERN: wlan_control: 9235, 78
KERN: wlan_control: 9235, 76
KERN: [net/atheroswifi/0] ieee80211_ref_node
(ieee80211_send_probereq:1748) 0xcdd45000<f4:ec:38:ff:f9:3c> refcnt 3
KERN: NDP entry 0xce130460 Marked as VALID
KERN: register_domain(9, unix)
KERN: [net/atheroswifi/0] scan_task: chan 1g -> 6g [active, dwell min
20ms max 0ms]
KERN: [net/atheroswifi/0] ieee80211_ref_node
(ieee80211_send_probereq:1748) 0xcdd45000<f4:ec:38:ff:f9:3c> refcnt 3
KERN: [net/atheroswifi/0] scan_task: chan 6g -> 11g [active, dwell min
20ms max 0ms]
KERN: [net/atheroswifi/0] ieee80211_ref_node
(ieee80211_send_probereq:1748) 0xcdd45000<f4:ec:38:ff:f9:3c> refcnt 3
KERN: [06:25:56:69:f5:c6] new probe_resp on chan 11 (bss chan 11) "casa"
rssi 48
KERN: [06:25:56:69:f5:c6] caps 0x531 bintval 100 erp 0x100
KERN: [06:25:56:69:f5:c6] new beacon on chan 11 (bss chan 11) "casa" rssi
49
KERN: [06:25:56:69:f5:c6] caps 0x531 bintval 100 erp 0x100
KERN: [06:25:56:69:f5:c6] new beacon on chan 11 (bss chan 11) "casa" rssi
48
KERN: [06:25:56:69:f5:c6] caps 0x531 bintval 100 erp 0x100
KERN: [net/atheroswifi/0] scan_task: chan 11g -> 7g [active, dwell min
20ms max 0ms]
KERN: [net/atheroswifi/0] ieee80211_ref_node
(ieee80211_send_probereq:1748) 0xcdd45000<f4:ec:38:ff:f9:3c> refcnt 3
KERN: [net/atheroswifi/0] scan_task: chan 7g -> 13g [active, dwell min
20ms max 0ms]
KERN: [net/atheroswifi/0] ieee80211_ref_node
(ieee80211_send_probereq:1748) 0xcdd45000<f4:ec:38:ff:f9:3c> refcnt 3
KERN: /dev/net/atheroswifi/0: media change, media 0x300a0 quality 1000
speed 1000000000
KERN: [net/atheroswifi/0] scan_task: chan 13g -> 2g [active, dwell min
20ms max 0ms]
KERN: [net/atheroswifi/0] ieee80211_ref_node
(ieee80211_send_probereq:1748) 0xcdd45000<f4:ec:38:ff:f9:3c> refcnt 3
KERN: [net/atheroswifi/0] scan_task: chan 2g -> 3g [active, dwell min
20ms max 0ms]
KERN: [net/atheroswifi/0] ieee80211_ref_node
(ieee80211_send_probereq:1748) 0xcdd45000<f4:ec:38:ff:f9:3c> refcnt 3
KERN: [net/atheroswifi/0] scan_task: chan 3g -> 4g [active, dwell min
20ms max 0ms]
KERN: [net/atheroswifi/0] ieee80211_ref_node
(ieee80211_send_probereq:1748) 0xcdd45000<f4:ec:38:ff:f9:3c> refcnt 3
KERN: [net/atheroswifi/0] scan_task: chan 4g -> 5g [active, dwell min
20ms max 0ms]
KERN: [net/atheroswifi/0] ieee80211_ref_node
(ieee80211_send_probereq:1748) 0xcdd45000<f4:ec:38:ff:f9:3c> refcnt 3
KERN: [net/atheroswifi/0] scan_task: chan 5g -> 8g [active, dwell min
20ms max 0ms]
KERN: [net/atheroswifi/0] ieee80211_ref_node
(ieee80211_send_probereq:1748) 0xcdd45000<f4:ec:38:ff:f9:3c> refcnt 3
}}}
Even if I don't try to connect the log keeps being filled with messages
like this:
{{{
KERN: [net/atheroswifi/0] ieee80211_check_scan: active scan, append,
nojoin, once
KERN: [net/atheroswifi/0] macaddr bssid chan rssi rate
flag wep essid
KERN: + 06:25:56:69:f5:c6 06:25:56:69:f5:c6 11 +56 54M ess wep
"casa"
KERN: ieee80211_notify_scan_done
KERN: wlan_control: 9235, 76
KERN: ifmedia_ioctl: switching wlan to Type: IEEE 802.11 Wireless
Ethernet
KERN: Mode: autoselect
KERN: SubType: autoselect
KERN: wlan_control: 9234, 16
KERN: wlan_control: 9234, 17
KERN: wlan_control: 9234, 26
KERN: wlan_control: 9234, 103
KERN: [net/atheroswifi/0] ieee80211_scanreq: flags 0x20052 duration
0x7fffffff mindwell 0 maxdwell 0 nssid 1
KERN: [net/atheroswifi/0] ieee80211_check_scan: active scan, append,
nojoin, once
KERN: [net/atheroswifi/0] macaddr bssid chan rssi rate
flag wep essid
KERN: + 06:25:56:69:f5:c6 06:25:56:69:f5:c6 11 +56 54M ess wep
"casa"
KERN: ieee80211_notify_scan_done
}}}
--
Ticket URL: <http://dev.haiku-os.org/ticket/8362>
Haiku <http://dev.haiku-os.org>
Haiku - the operating system.
Other related posts:
