#5551: SB700/SB800 USB EHCI Controller not working -------------------------+-------------------------------------------------- Reporter: MrSunshine | Owner: mmlr Type: bug | Status: new Priority: normal | Milestone: R1 Component: Drivers/USB | Version: R1/Development Keywords: | Blockedby: Platform: All | Blocking: -------------------------+-------------------------------------------------- Old description: > ID: 0x4396 > Vendor: 0x1002 > > When inserting an usb stick i get this: > KERN: usb error control pipe 63: timeout waiting for queued request to > complete > KERN: usb error ehci 5: qtd (0x03cd3c80) error 0x00080248 > KERN: usb error control pipe 63: timeout waiting for queued request to > complete > KERN: usb error ehci 5: qtd (0x03cd3c80) error 0x00080248 > KERN; usb error ehci 5: error while setting device address New description: ID: 0x4396 Vendor: 0x1002 {{{ When inserting an usb stick i get this: KERN: usb error control pipe 63: timeout waiting for queued request to complete KERN: usb error ehci 5: qtd (0x03cd3c80) error 0x00080248 KERN: usb error control pipe 63: timeout waiting for queued request to complete KERN: usb error ehci 5: qtd (0x03cd3c80) error 0x00080248 KERN; usb error ehci 5: error while setting device address }}} -- Comment(by mmlr): This is almost certainly an interrupt issue. Someone may eat the USB interrupts (sharing problem) or they aren't correctly configured (i.e. the advertised interrupt lines aren't actually correct). If it is, there's nothing that could be done from the USB stack side of things. -- Ticket URL: <http://dev.haiku-os.org/ticket/5551#comment:2> Haiku <http://dev.haiku-os.org> Haiku - the operating system.