#15461: UEFI bootloader doesn't detect hard disk when SATA mode is set to Intel
Rapid Storage mode in firmware
-----------------------+------------------------------
Reporter: v-l | Owner: nobody
Type: bug | Status: new
Priority: normal | Milestone: Unscheduled
Component: - General | Version: R1/Development
Keywords: | Blocked By:
Blocking: | Has a Patch: 0
Platform: All |
-----------------------+------------------------------
Haiku is installed on my computer (Dell Latitude E6440), when in its
firmware has an option to set the SATA mode to ATA, AHCI or RAID/Intel
Rapid Storage, the latter being the default mode (see attached image).
When I try to boot my Haiku installation in UEFI mode, and using Haiku's
UEFI bootloader, the bootloader fails to detect my hard disk and therefore
can't boot (see attached image).
This happens with both the beta1 bootloader
(https://ftp.osuosl.org/pub/haiku/r1beta1/haiku-
r1beta1-x86_64-efiloader.zip) and the BOOTX64.EFI I took from the
hrev53567 anyboot iso.
If I set the SATA mode to AHCI, my SSD is detected normally and I can boot
Haiku.
If I boot Haiku from a live USB, I can access my hard disk data and Haiku
partition whether the SATA mode is set to AHCI or RAID/Intel Rapid
Storage.
--
Ticket URL: <https://dev.haiku-os.org/ticket/15461>
Haiku <https://dev.haiku-os.org>
The Haiku operating system.
