#10750: Can't boot from USB3 port: "PANIC: did not find any boot partitions!" on hrev47105-x86gcc2hybrid-anyboot ---------------------------+---------------------------- Reporter: ivanov | Owner: mmlr Type: bug | Status: new Priority: normal | Milestone: R1/alpha5 Component: Drivers/USB | Version: R1/Development Resolution: | Keywords: Blocked By: 8954 | Blocking: 7665, 10749 Has a Patch: 0 | Platform: All ---------------------------+---------------------------- Comment (by taos): You might find it interesting to know that I get an almost identical PANIC (see attached jpg file) when booting hrev47259-x86gcc2hybrid-anyboot from usb on a Samsung NC10 - that's an Atom N270 equipped netbook without any usb3 ports. hrevr1alpha4-44619 boots fine (same for alpha 2 and 3, so that's in contrast to similar problems reported in #8652 or #5983). listdev output from alpha4 doesn't mention XHCI, only EHCI, and UHCI, see excerpt: {{{ device Serial bus controller (USB controller, EHCI) [c|3|20] vendor 8086: Intel Corporation device 27cc: NM10/ICH7 Family USB2 EHCI Controller device Serial bus controller (USB controller, UHCI) [c|3|0] vendor 8086: Intel Corporation device 27cb: NM10/ICH7 Family USB UHCI Controller #4 device Serial bus controller (USB controller, UHCI) [c|3|0] vendor 8086: Intel Corporation device 27ca: NM10/ICH7 Family USB UHCI Controller #3 device Serial bus controller (USB controller, UHCI) [c|3|0] vendor 8086: Intel Corporation device 27c9: NM10/ICH7 Family USB UHCI Controller #2 device Serial bus controller (USB controller, UHCI) [c|3|0] vendor 8086: Intel Corporation device 27c8: NM10/ICH7 Family USB UHCI Controller #1 }}} lspci output: {{{ 00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 02:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) }}} I'm not sure if the provided information is relevant here. Should I open a new ticket or add this information to one of the older tickets? -- Ticket URL: <https://dev.haiku-os.org/ticket/10750#comment:9> Haiku <https://dev.haiku-os.org> Haiku - the operating system.