[hackpgh-discuss] Re: Laser cutting acrylic
- From: "j. eric townsend" <jet@xxxxxxxxxxxx>
- To: hackpgh-discuss@xxxxxxxxxxxxx
- Date: Fri, 17 Jul 2015 01:52:29 -0400
On 7/15/15 22:29, Chad Elish wrote:
Nope, Its acrylic… Have fun!
Acrylic good, polycarb bad. If you don't have an ID label use a pair of
pliers to try and break off a corner. If it snaps like glass it's
probably acrylic, if it just bends it's probably polycarb.
We use polycarb for shielding on the lasersaur, and "it hates lazers" is
reason #1. :-)
--
J. Eric Townsend
<
http://www.flatline.net>
HF: KG6ZVQ
PGP: 0x335E5548 / 75DB 5C22 FD5D F33E B1FA D5BA B429 EA93 335E 5548
Other related posts: