Dang, only 1/16th?
I was considering doing a second cheese follower in HDPE.
Hm.... guess I could try what Chad suggested, print out two or three layers
and stack 'em (and add a few solid disc layers).
On Mon, Jul 20, 2015 at 7:16 PM, Gabe Cottrell <gabedb556@xxxxxxxxx> wrote:
HDPE is laserable down side only in very thin sections anything thicker
than 1/16th and the plastic with reweld.
On Mon, Jul 20, 2015 at 7:09 PM, Tim Cannon <timmycninja@xxxxxxxxx> wrote:
Can you use this stuff in the laser cutter as well, we are making another
silicone mold tonight and we were wondering if we would get better results
from the laser cutter?
Attachment:
cheese_follower_lasercut.jpg
Description: JPEG image
