Thank you for repairing that Geno!
-chad
On Nov 9, 2016, at 3:35 PM, Yevgeniy Soroka <ukranians2@xxxxxxxxx> wrote:
It sounds like the magnet I rigged up as a temp fix to the broken door switch
has moved, and now it always says the shop is open. The switch will be
replaced tonight.
-Geno
On Wed, Nov 9, 2016 at 3:25 PM, Yevgeniy Soroka <ukranians2@xxxxxxxxx
<mailto:ukranians2@xxxxxxxxx>> wrote:
Oh oh. Thats not good. hardware issue with shop door status indicator. I will
take a look at it tonight. Thanks for telling me! Sorry you had to go all the
way there. Sometimes technology is misleading.
-Geno
On Wed, Nov 9, 2016 at 3:22 PM, Biju Obi <biju.obi1@xxxxxxxxx
<mailto:biju.obi1@xxxxxxxxx>> wrote:
Hi Geno,
I did see that the shop light was on according to the website. I just wanted
to make sure the person didn't leave before I got there. I'm here now and the
door is locked with the padlocks. The website still says the shop light is on
so maybe there is something wrong.
I can't be in the shop at 7 tonight because I have another obligation. I'd
like to try to come tomorrow during the day. The next night I'm free is
Friday. Thanks for being willing to help me.
-Biju
On Wednesday, November 9, 2016, Yevgeniy Soroka <ukranians2@xxxxxxxxx
<mailto:ukranians2@xxxxxxxxx>> wrote:
Hi Biju, the shop appears to be open right now according to the status
indicator on www.hackpittsburgh.org <http://www.hackpittsburgh.org/>. This
means you are welcome to come as long as someone is there.
We would be able to train you on the laser cutter tonight at about 7pm. If
tonight doesnt work, another day then. But your best options are 7pm and
later on workdays, or on weekends.
-Geno
HackPGH secretary
On Wed, Nov 9, 2016 at 2:56 PM, Biju Obi <biju.obi1@xxxxxxxxx <>> wrote:
No, I haven't. I won't use it today then, but I'd still like to come in. Are
you there?
On Wednesday, November 9, 2016, Steven Owens <stevenjowens@xxxxxxxxx <>>
wrote:
I'm afraid I've got my hands full today, working on my house. Have you
been trained on the laser cutter?
On Wed, Nov 9, 2016 at 2:38 PM, Biju Obi <biju.obi1@xxxxxxxxx <>> wrote:
Hey,
I'm a new member and I'd like to come today at 3. I plan to start working on
something with the laser cutter. Will anyone be there to let me in at 3 and
possibly help me cut around 5?
-Biju
--
Steven J. Owens
stevenjowens@xxxxxxxxx <>
puff@xxxxxxxxxxxxx <>
412-401-8060 <tel:412-401-8060>