[guispeak] Re: Computer Problem
- From: "Laura Eaves" <leaves1@xxxxxxxxxxxxxxx>
- To: <guispeak@xxxxxxxxxxxxx>
- Date: Fri, 12 Nov 2004 11:15:17 -0500
Did you try unloading and reloading jaws? Maybe it was just a speech lockup.
I have an XP system running jaws 5.10, which isn't much different from 5.0,
and it is very jerky -- sometimes very responsive, sometimes stops for a
half minute or so and is generally sluggish.
I have tried virus scans, defrags, other tuning, but nothing helps.
Anyway, aren't computers fun????;)
--le
----- Original Message -----
From: "Bundy, Keith" <Keith.Bundy@xxxxxxx>
To: <guispeak@xxxxxxxxxxxxx>; <vicug-l@xxxxxxxxxxxxxxxxxxxxx>
Sent: Friday, November 12, 2004 10:35 AM
Subject: [guispeak] Computer Problem
>I am working with an individual using JAWS 5.0 with Windows 98.
> Yesterday while downloading emails, his computer locked up halfway
> through the process.
>
> He proceeded to restart the computer, but JAWS did not run. After
> another restart, JAWS began to operate again.
>
> He is using AVG and I had him do a virus can, and the computer locked up
> after approximately 10,000 files were scanned. I am thinking of having
> him do Scandisk and Defrag and then I am thinking of putting Spybot or
> AdAware on and checking for spy ware.
>
> Any other thoughts/suggestions? thanks.
>
>
> Keith Bundy
> Director of Student Development
> Dakota State University
> 605-256-5121
> Email: Keith.Bundy@xxxxxxx
> http://departments.dsu.edu/bundyk
> =20
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** guispeak-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** guispeak-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:guispeak-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** guispeak-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
