[gps-talkusers] Re: using the garmin glo
- From: "Michael May" <mikemay@xxxxxxxxxxxxxxxx>
- To: <gps-talkusers@xxxxxxxxxxxxx>
- Date: Mon, 11 Mar 2013 11:07:17 -0700
John,
It just pairs. There is no PIN request.
There also isn't a way I know of to confirm which receiver is being used. I
assume it is the GLO if you have it on and connected.
Mike
-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of John Gallagher
Sent: Monday, March 11, 2013 5:32 AM
To: gps-talkusers@xxxxxxxxxxxxx
Subject: [gps-talkusers] using the garmin glo
Hi all
Wonder if someone can help
to pair the glo to an iphone I went in to bluetooth and it asked to pair
with the receiver garmin glo I said yes but I could not find a pin.
the iphone says it is connected to the garmin glo.
Now if I use say blind square or tom tom will the iphone use the glow or
it's own gps.?
I cannot seem to find a way to see which it is using.
many thanks for any replies.
To change your email settings (unsubscribe, digest only, or vacation mode):
http://senderogroup.com/social_media/email.htm
Additionally, to unsubscribe send an email to
gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
To change your email settings (unsubscribe, digest only, or vacation mode):
http://senderogroup.com/social_media/email.htm
Additionally, to unsubscribe send an email to
gps-talkusers-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject.
Other related posts:
