Robert, To determine the total distance using 4.0: Press R for Route Commands List Press A for route announcement commands Press D for Total Route distance The nice thing about the 4.0 is the restructuring of many list, including the route command list. Before if you were to press R and forgot a command, you will be presented with a list of commands in no such order. Now, if you press R you will be presented with a real list that you can arrow through and select items from, and after each command, it shows you the keystroke of achieving the command and it is now possible to just press enter to issue the command. The shortcut for getting the total route distance is R A D. the SPACE with R command that you mention has always been meant to repeat the last message even in 3.5. Hope this helps. Kevin ----- Original Message ----- From: "robert stigile" <rstigile@xxxxxxxxxxxxx> To: "Mike MAY" <gps-talkusers@xxxxxxxxxxxxx> Sent: Tuesday, August 14, 2007 5:43 PM Subject: [gps-talkusers] ommand > Hello All, > I created a route in virtual mode, and after it was finished I wanted to > check the total distance. > In version 3.5 you would do chord r and then t for total distance. > I have tried this as well as choosing the help and can not seem to find > out how I check the total distance of a route. > Ic someone can help with this, I would appreciate it. > Thanks, > > Robert Stigile > >