[gps-talkusers] Re: can not start planner after v3 install ???
- From: Todd Patkus <tpatkus@xxxxxxxxxxxxxx>
- To: gps-talkusers@xxxxxxxxxxxxx
- Date: Mon, 19 Jul 2004 00:29:18 GMT
Hello y'all,
This is one very good example why I never like the PDI staff! They are always
very problematic. I am glad I never upgraded my BN here to version 5.1! I
dislike the staff there. They are good-for-nothing!!! I hope you understand
my honest feelings toward these staff! Thank you.
> ----- Original Message -----
>From: "Rich Irwin" <rich.irwin@xxxxxxxxxxx
>To: <gps-talkusers@xxxxxxxxxxxxx
>Date: Sun, 18 Jul 2004 17:19:18 -0700
>Subject: [gps-talkusers] Re: can not start planner after v3 install ???
>Hi Doug:
>I encountered this problem also and neither a reset or a reset with FDS
>would solve it. I had to erase the windows folder and then run the original
>KeySoft 5.1 exe application. I did not have not have to reinstall GPS v3.
>Rich Irwin
>rich.irwin@xxxxxxxxxxx <mailto:rich.irwin@xxxxxxxxxxx
>-----Original Message-----
>From: gps-talkusers-bounce@xxxxxxxxxxxxx
>[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx]On Behalf Of doug martin
>Sent: Sunday, July 18, 2004 2:49 PM
>To: gps-talkusers@xxxxxxxxxxxxx
>Subject: [gps-talkusers] can not start planner after v3 install ???
>Hi. After installing version 3 of the GPS, I get the message about "cannot
>start the planner or alarm system." I try reset several times with no
>effect. Following directions, I reinstall Keysoft 5.1 and reinstall
>Version 3 of the GPS software. I then get the same message about can not
>start the planner.
>It appears that I must choose between using the GPS or the planner to have
>installed and working. Anybody know what the solution is?
>Aloha,
>Doug Martin
Other related posts:
