[goodfeel] Re: I am having some issues that I need help with please
- From: "Duke" <douk.fattah@xxxxxxxxx>
- To: <goodfeel@xxxxxxxxxxxxx>
- Date: Mon, 24 Nov 2008 14:34:15 -0000
Hi:
I did in fact try the printer with my Braille lite and it worked. So the
cable and the printer are fine. Since we ran out of ideas, then I'll have to
reformat and recover original factory defaults. Is there anything special I
need to do with Goodfeel in order to keep the auth?
Douk
----- Original Message -----
From: <albertm13@xxxxxxxx>
To: <goodfeel@xxxxxxxxxxxxx>
Sent: Monday, November 24, 2008 3:40 AM
Subject: [goodfeel] Re: I am having some issues that I need help with please
Hi,
Try the printer cable and the printer on another computer and see what
happens.
Maybe someone could look at the computer for you. It sounds like you tried
all the things that I wold recommend.
Sorry, that I have no great ideas.
Albert
-- "Duke" <douk.fattah@xxxxxxxxx> wrote:
Hi:
The lime issue has been resolved. The embosser however still doesn't want to
respond. I did the command you provided but it reported that such file
didn't exist. I checked the device manager only to find that my parallel
port had been switched to lpt3 for some reason I didn't understand. I even
tried the command you provided with lpt 3, but it only sat there with no
responce, and I had to do control alt delete to end its task. My computer is
a sony vaio, and it came with only a parallel port and no serial ports. I
had bought a PCI card with two serial ports on it (I couldn't find one with
only one). I installed it to work with my braille display, and everything
was working fine. I didn't check though whether the parallel port was named
by the drivers of the new card being netmos although the card didn't have
aparallel port. Now that the problem emerged, I checked, and the port was
named as netmos lpt3. I decided to uninstall the parallel port and reinstall
it but to no avail. then I decided to remove the card altogether in order to
see if the computer would pickup the original port. Unfortunately, the
device manager didn't show any port at all. I ran the add hardware wizzard
but it didn't automatically detect any hardware. So I had to add it manually
as a standard parallel port, and it still selected lpt3. I changed it to
lpt1, but it didn't work either way. I am tempted now to run the recovery
wizzard that will put the computer back to its original state wich means
that the hard disk will be reformatted. I am stomped. I will wait for any
great ideas before I do that.
Thanks
Douk
----- Original Message -----
From: <albertm13@xxxxxxxx>
To: <goodfeel@xxxxxxxxxxxxx>
Sent: Saturday, November 22, 2008 5:04 AM
Subject: [goodfeel] Re: I am having some issues that I need help with please
Hi,
Whenever you run a different version of Lime than the one you ran previously
Lime will give you that message.
Lime also becomes unauthorized whenever you switch versions.
If we didn't give you a password to authorize Lime then you should authorize
Lime by starting GOODFEEL and opening and closing the Authorization dialog
and then closing GOODFEEL.
I never found any reason to think that XP SP2 causes problems with GOODFEEL.
I really don't like all-in-one devices. We had a Brother and it worked fine
by itself but it slowed down the computer that we connected it to. It also
wasn't uninstalled completely by its uninstaller. At the same time I'd be a
little surprised if it bothered your Braille Blazer on LPT1 unless it also
is connected to LPT1 in which case I'd be highly suspicious of it. How is
your Brother connected to your Computer?
Test your Braille Blazer by opening a command prompt and typing:
echo abc^l>lpt1
and ^l means control+L (as in formfeed).
Tell us how it goes.
Albert
>>> Douk wrote:
Hi guys:
I have sent the following message to the dancing dots support Address. I
also wanted to post it here to see if anybody could pitch in with some great
ideas. Please see below.
Let me first tell you that I installed windows xp sp2 as an update
successfully, then I installed a new Brother printer/scanner/fax 3 in one
Issue one:
I tried to run lime 8, and it gave me this error message:
"Error
Your existing LIME.INI file is not compatible with this version of Lime, and
will be ignored.
OK Cancel"
When I click ok, it gives me the run as free or click here if you already
paid. When I click on the "click here if you paid" it asks for a password.
Issue two:
I can't Braille my music via my Braille blazer using lpt1. I checked
everything, and I couldn't pin down where the problem is? It used to work
properly.
Your help is much appreciated, and asap please
Thanks
Douk
____________________________________________________________
Click here for proven Credit Repair programs. Increase your score today!
http://thirdpartyoffers.juno.com/TGL2131/fc/PnY6rbuoS2JjkSZ9TdtNNIFcOA5rlNjEG0yfdaZxGu0uYrekG1zhq/
** To leave the list, click on the immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq
____________________________________________________________
Paying too much for your business phone system? Click here to compare
systems from top companies.
http://thirdpartyoffers.juno.com/TGL2131/fc/PnY6rbwT014b3u408XEPnVFWYHjFzRgkyZtF1rC1QScSRm3b3M1H2/
** To leave the list, click on the immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** goodfeel-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:goodfeel-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** goodfeel-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
