On Mon, Jun 25, 2012 at 8:46 PM, Guillaume Chauvat <guillaume.chauvat@xxxxxxxxxxxxxx> wrote: > Hi again, > > I just succeeded in correcting that problem. Cool. > I'm sorry for disturbing you with that. Please. > > Thank you for your interest. > Regards. > > Guillaume > > > > > > 2012/6/25 Fernando González <fergonco@xxxxxxxxx> >> >> Hi Guillaume, >> >> That's suspicious. Is it possible to have some test data to reproduce >> the problem? The simpler the test data is, the better. >> >> On Mon, Jun 25, 2012 at 9:29 AM, Guillaume Chauvat >> <guillaume.chauvat@xxxxxxxxxxxxxx> wrote: >> > Hi, >> > >> > As I request the following lines: >> > >> > export =[as geometry]; >> > foreach building in result { >> > add buildingWithFlatRoofExtrusion(building/truc, building/Hauteur) >> > to >> > export; >> > show 'iter ok'; >> > } >> > show 'ok'; >> > >> > I get the following result: >> > >> > iter ok >> > iter ok >> > ... (iter ok is repeated 8 times whereas I'm expecting 31 iterations) >> > (no end 'ok') >> > >> > It seems that the function is able to do the process eight times but >> > then >> > stops it. >> > Maybe it's because of the eigth geometry ? >> > >> > Thank you, >> > Regard >> > >> > Guillaume >> > >> > >> > >> > 2012/6/22 Fernando González <fergonco@xxxxxxxxx> >> >> >> >> I've created a new ticket with your problem: >> >> http://xp-dev.com/trac/ggl2/ticket/121 >> >> >> >> > Can you confirm that you're getting the expected result, even if you >> >> > get the error at the end? >> >> >> >> An easy way to check this is to add a >> >> >> >> show 'ok'; >> >> >> >> at the end of your script. Temporal file cleaning happens after the >> >> last script line so, if 'ok' appears in the console, it means that the >> >> script run well and it is the cleaning that fails. >> >> >> >> >> > >> >> >