All students should be seated at the venue before start time. Jury may start
the proceedings from any group depending on the availability of respective
advisor.
Note that the timing for Jury 2 groups is 09:30am.
Presentation schedule
Final Year Projects (Session Fall 2018), MED
Jury 1:
Dr. Rizwan Shad, Dr. Faiz-ul-Hasan, Mr. Babar Saeed, Mr. Umar Hayat, Dr.
Muhammad Kashif
Venue: Fluid mechanics lab., Reporting time (all groups): 10:45am
Jury 2:
Prof. Taimur Qureshi, Mr. Ahmad Mahmood, Dr. Gulraiz Ahmad, Ms. Sadaf Zeeshan,
Dr. Zohaib Aftab
Venue: Seminar Hall, Reporting time (all groups): 09:30am
Sr. No.
Title
Advisor
Students
Jury
1.
Design and test of an affordable cold room powered by hybrid electric / solar
for improving storage quality and reducing wastage of horticulture produce.
Mr. Taimur Qureshi
Ali Hamza (22)
Zia Rehman (09)
Hamza Shehzad (08)
Jury 2
2.
Design and manufacturing of a die sinking machine
Mr. Taimur Qureshi
Momar Shakeel (21)
Awais Saleem (25)
Khizar Shahzad (40)
Jury 2
3.
Integrating solar electrical system with a utility electrical system of a small
house.
Mr. Taimur Qureshi
Mohsin Rafiq (74)
Zaka-ur-Rehman (72)
Madad Ali (58)
Jury 2
4.
Design and fabrication of an ergonomic exoskeleton
Dr. Zohaib Aftab
Faizan Ahmad (67)
M. Madasir (61)
Yamima Yousaf (79)
Jury 2
5.
Design and fabrication of automatic mechanical air purifier machine
Ms. Sadaf Zeeshan
Moeed bin Masood (23)
Ahmad Wajeeh (38)
Muhammad Faizan (19)
Jury 2
6.
Design of automatic crop disease detection and spray machine
Ms. Sadaf Zeeshan
Tabish Sadiq (13)
Usman Arshad (12)
Hassan Zulfiqar (30)
Jury 2
7.
Electric bicycle
Ms. Sadaf Zeeshan
Abubakar Gondal (39)
Usman Akhtar (35)
Ali Husnain (03)
Jury 2, Deferred presentation
8.
Social Distancing & Mask Monitor Drone for COVID Prevention
Ms. Marium Shahid
Abdul Rehman (49)
Zaroon Ahmed (55)
Abdul Wahab (60)
Jury 1, Title change request, Presentation deferred
9.
Design and development of a multi-material filament extrusion machine for
composite bone implants
Mr. Umer Hayat
Suffyan (48)
Ans Chaudhary (43)
Rashwan Shahid (65)
Jury 1, Deferred presentation
10.
Lowering the Aerodynamic Drag of commercial vehicles to improve their mileage
to fuel ratio
Dr. Gulraiz Ahmed
Talha Hanif (45)
Abdul Kareem Khan (42)
Usama Hanif (57)
Jury 2
11.
Investigation of wings in ground-effect using computational fluid dynamics and
experimentation
Dr. Gulraiz Ahmed
Abdul Mannan (37)
Ali Asjad (02)
Jury 2
12.
Design and fabrication of an efficient and portable biodigester for domestic
biodegradable solid waste with energy recovery and sizing calculations
Mr. Nouman Liaqat
Ghayyur Ahmed (17)
Talha Javed (07)
Abdullah Zahoor (20)
Jury 1
13.
Design and Fabrication of Alternate Energy Storage Device using Phase Change
Material (PCM)
Mr. Nouman Liaqat
Ameer Hamza (82)
Usama Taj (62)
Zain Dastageer (71)
Jury 1
14.
Design and fabrication of benchtop plastic injection molding machine
Mr. Baber Saeed
Usman Ahmed (16)
Nazim Imam (27)
Jury 1
15.
Design and fabrication of multipurpose seed sowing machine
Mr. Baber Saeed
Arshad Nasir (50)
Faisal Mumtaz (73)
Rao Rohab Javaid (76)
Jury 1
16.
Design and development of a Traffic powered vertical axis wind turbine
Mr. Muhammad Kashif
Mr. Noman Khalid
Muhammad Abbas (32)
Saad Rehman (31)
Rafay Khan (01)
Jury 1
17.
Design and development of a solar-wind hybrid generator
Mr. Muhammad Kashif
Mr. Ahmed Z. Zaidi
Atif Shahid (80)
Muhammad Sohaib (78)
Anam Shehzadi (84)
Jury 1
18.
Development of Jominy end quenching apparatus and experimentation to
investigate hardenability of metals
Dr. Rizwan Shad,
Mr. Qasim Shafqat
Muhammad Awais (59)
Muhammad Umar Hayat (44)
Muhammad Adnan (52)
Jury 1
19.
Design and Fabrication of Treadmill Based Tricycle for Daily commute
Mr. Khizar Ahmad Zaki
Aqib Ijaz (F17, 65)
Hamza Naseem (70)
Ahsan Raza (77)
Jury 2
20.
Hydrodynamic separator
Dr. Rizwan Shad
Mr. Umar Hayat
Rana Sumair Ejaz (41)
Osama Malik (47)
Asad Ali (54)
Jury 1
21.
Automatic bottle filling and capping machine
Mr. Khizer Ahmed Zaki
Arslan Imran (04)
Ahsan Arshad (11)
Waqas Iqbal (29)
Jury 1
