Rather than use edit mode, use page mode and change the size of the paper. I did this for Shorts and it works well. Sent from my iPhone On Jun 7, 2013, at 11:34 AM, Jim Pitchford <jim@xxxxxxxxxxxxxxxx> wrote: > I have tried a work around of drawing the FormattedText control into a > picture.graphics, and then g.drawpicture into a canvas. Whilst this creates > the desired scaling effect, it is very limited as picture uses bitmap > graphics, so the quality of fonts etc diminishes quickly. > > It would be nice to be able to find a way of keeping the graphics quality. > > Jim Pitchford > jim@xxxxxxxxxxxxxxxx > > > > On 7 Jun 2013, at 10:08, Jim Pitchford <jim@xxxxxxxxxxxxxxxx> wrote: > >> In order to be able to print my new FTC based control, I need to be able to >> scale it. >> >> The control I have built uses EditMode to take advantage of its soft >> wrapping - allowing me to fit text into any sized output. But I notice that >> there is no scaling within EditMode. >> >> SetScale seems to be only available in Normal or Page modes. Is it possible >> to turn on soft-wrapping in either of these modes? >> >> Or is there another solution to get a scaled copy of a soft wrapped EditMode >> into a canvas paint event? >> >> Regards >> >> >> >> FTC Website: http://www.bkeeney.com/products/formatted-text-control >> Set List Options (digest and vacation modes): www.freelists.org/list/ftcdev >> List Archive: www.freelists.org/archives/ftcdev >> Unsubscribe: Send email to ftcdev-request@xxxxxxxxxxxxx with "unsubscribe" >> in the subject field. > > FTC Website: http://www.bkeeney.com/products/formatted-text-control > Set List Options (digest and vacation modes): www.freelists.org/list/ftcdev > List Archive: www.freelists.org/archives/ftcdev > Unsubscribe: Send email to ftcdev-request@xxxxxxxxxxxxx with "unsubscribe" in > the subject field. > > FTC Website: http://www.bkeeney.com/products/formatted-text-control Set List Options (digest and vacation modes): www.freelists.org/list/ftcdev List Archive: www.freelists.org/archives/ftcdev Unsubscribe: Send email to ftcdev-request@xxxxxxxxxxxxx with "unsubscribe" in the subject field.