To all, I have an AW70 at ver 8.3 used as an AimStar remote collector that stopped running the r_hsfetch program for no apparent reason. The result is the operator trends will not show history and the current alarm display doesen't catch all of the alarms. This historian is the second historian needed for operator trends. The remote collector point historian still works fine and sends all of the point data to the off platform historian. Has anyone ran into this problem before and if so what was the cause? Thanks for the help in advance, Ron Murphy Xcel Energy | Responsible By Nature Engineer 13125 E US Hwy 40, Hayden, CO. 81639 O: 970.276.2309 E: ronald.murphy@xxxxxxxxxxxxxx<mailto:ronald.murphy@xxxxxxxxxxxxxx> ______________________________________________ XCELENERGY.COM Please consider the environment before printing this email _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave