Re: [foxboro] is this thing on? B0193AX_S
- From: "Boulay, Russ" <Russ.Boulay@xxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Sun, 29 May 2011 02:30:16 -0400
B0193AX latest rev is AA which has gone past Rev Z...
Starting with Rev Z ...the RSMMOP was enhanced to change RSMMOP as an Integer
and have a 0-3 as an option...
I/A version V8.5/8.6 support that option....
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Hizamri Johari
Sent: Saturday, May 28, 2011 9:57 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] is this thing on? B0193AX_S
Hi David
From Foxdoc B0913AX_S pg 781/800 and pg 792/800 : ..
RSMMOP reset mismatch option Boolean no-con/no-set 0 0 to 1 ( pg 781/800 )
RSMMOP Reset Mismatch Option is used to specify that the DSR input be reset
when a mismatch alarm occurs in an MOVLV block. ( pg 792/800 )
0 = No reset action.
1 = Reset DSR inputs if mismatch alarm occurs.
God knows best
Best Regards..
Hizamri
----- Original Message -----
From: "Johnson, David" <David.Johnson@xxxxxxxxxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Sent: Sunday, May 29, 2011 11:28 AM
Subject: [foxboro] is this thing on?
Hello all,
I have a question about motor blocks .
Yes I know GDEV is better, but that's not how the game is played. So anyway
I know the RSMMOP is sometimes a booger, but the manual B0193AX says the
options are 0,1,2,3. I'd like to use a 2 so if there is a mismatch alarm,
the outputs go OFF, But when I try to use anything but a 0 or 1 it tells me
that it's a boolean field. This is on a current version of IA 8.5 on a
FCP270. So does anyone know if there is a quickfix, or something like that,
or is the manual just wrong.
Thanks,
David
________________________________
Confidentiality Notice:
The information contained in this message is private and confidential. This
information is intended only for the individual or entity named above. If
the reader of this message is not the intended recipient, you are hereby
notified that any use, review, dissemination, distribution, copying or
action taken based on this message or its attachments, if any, is strictly
prohibited. If you are not the intended recipient, please contact the sender
by reply email and delete or destroy all copies of this message and any
attachments. Thank you.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please go to
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
