[foxboro] foxboro] Using iccdrvr.tsk to delete blocks
- From: "Sieling, Marcel" <Marcel.Sieling@xxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 24 Apr 2013 12:53:30 -0400
I'd say file a CAR.
best regards / mit freundlichen Grüßen -
Marcel Sieling
Technical Sales Consultant
Invensys Systems GmbH
Am 24.04.2013 um 17:37 schrieb "QUEIROLO, IGNACIO ESTEBAN"
<ignacio.queirolo@xxxxxxx>:
> RIN
>
> -----Mensaje original-----
> De: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] En
> nombre de martin.theobald@xxxxxxxxx
> Enviado el: Miércoles, 24 de Abril de 2013 12:07
> CC: foxboro@xxxxxxxxxxxxx; foxboro-bounce@xxxxxxxxxxxxx
> Asunto: Re: [foxboro] Using iccdrvr.tsk to delete blocks
>
> Ignacio,
> What type of block is/was 'V901:TMR127'?
>
> Regards,
>
> Martin Theobald
> www.groupcytek.com
>
>
>
>
> From: "QUEIROLO, IGNACIO ESTEBAN" <ignacio.queirolo@xxxxxxx>
> To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>,
> Date: 24/04/2013 14:37
> Subject: [foxboro] Using iccdrvr.tsk to delete blocks
> Sent by: foxboro-bounce@xxxxxxxxxxxxx
>
>
>
> I have to delete some blocks and I am trying to use iccdrvr.tsk to delete
> these blocks with a script. I did the script with only one block to test if
> it works and I have an error. Despite the error, the script works and the
> block is deleted but I would like to know why is this happen because is not
> normal.
> The error I have is:
> rm: cannot unlink entry "/opt/fox/ciocfg/V901/TMR127.*": The system cannot
> find the file specified.
>
> My script looks like (delete.icc):
> OPEN CPLBUG ALL USER
> DELETE V901:TMR127
> CLOSE
> EXIT
>
> The execution command is:
> # cd /opt/fox/ciocfg/api
> # iccdrvr.tsk -i /opt/tmp/delete.icc
>
> Can anyone give a hand with this error?
>
> Thanks in advance.
> Regards
>
>
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please select the Legal Entities link at invensys.com.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
