Re: [foxboro] Tracking new block parameters by revision level
- From: "Neufeld, Brahm" <Brahm.Neufeld@xxxxxxxxxx>
- To: "'foxboro@xxxxxxxxxxxxx'" <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 14 Oct 2014 15:54:46 -0600
I looked for a matrix on the support portal and came up empty handed - but I
can tell you that NASTDB and AMRTIN were introduced with I/A 8.0, and that
NASOPT was with I/A 8.4.
Brahm Neufeld
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Joseph M. Riccardi
Sent: Tuesday, October 14, 2014 3:30 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Tracking new block parameters by revision level
<html>
Folks,
At one point in the history of the IA System control block software, parameters
were added to allow a time delay in the detection of specific alarms (i.e.,
DEVTIM, ). Is there an easy way to find out what revision level these time
delay type parameters were added (i.e., V6.5, V8.X, etc.)?
Just trying to save some time searching through a couple dozen versions of the
control block books.
Thanks.
Joseph M. Riccardi
386-451-7607 Cell
Joe@xxxxxxxxxxxxx <mailto:Joe@xxxxxxxxxxxxx>
"To give real service you must add something that cannot be bought or measured
with money; and that is sincerity and integrity." - Donald A. Adams
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.thecassandraproject.org_disclaimer.html&d=AAIDAQ&c=zgHsTqBQkGAdNuoPRxUzSQ&r=R9UMiMkeSjiV9FWb7VxRXG0W2FAJHYNFjNjWClnSMuk&m=T2xVJYlvCyF_2M6CjUnIOgLwg4MOVgAGvWpxbTDWbzg&s=u3mgLBv72HhEwI09yvHesqYEMluf7dnFWZRf8rAsIk4&e=
foxboro mailing list:
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.freelists.org_list_foxboro&d=AAIDAQ&c=zgHsTqBQkGAdNuoPRxUzSQ&r=R9UMiMkeSjiV9FWb7VxRXG0W2FAJHYNFjNjWClnSMuk&m=T2xVJYlvCyF_2M6CjUnIOgLwg4MOVgAGvWpxbTDWbzg&s=K2KpPndFqtPB7TC9Br1Vr_QQiTvRmXx8udUGNrdvVTA&e=
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
IMPORTANT NOTICE ! This E-Mail transmission and any accompanying attachments
may contain confidential information intended only for the use of the
individual or entity named above. Any dissemination, distribution, copying or
action taken in reliance on the contents of this E-Mail by anyone other than
the intended recipient is strictly prohibited and is not intended to, in
anyway, waive privilege or confidentiality. If you have received this E-Mail in
error please immediately delete it and notify sender at the above E-Mail
address. Agrium uses state of the art anti-virus technology on all incoming
and outgoing E-Mail. We encourage and promote the use of safe E-Mail management
practices and recommend you check this, and all other E-Mail and attachments
you receive for the presence of viruses. The sender and Agrium accept no
liability for any damage caused by a virus or otherwise by the transmittal of
this E-Mail.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
