Re: [foxboro] Timing changes on loaded CP40
- From: CLeddon@xxxxxxx
- To: foxboro@xxxxxxxxxxxxx
- Date: Fri, 9 Sep 2005 06:15:21 EDT
There are a lot of things that can be done to reduce or eliminate the
overruns. You can phase the system to run blocks on a schedule to reduce the
load
on the CP. All blocks don't have to run on every cycle. By phasing you can
get the timer to run in the correct time base.
Chuck Leddon
Triconex
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
