Re: [foxboro] System Management Display shows the FCP270/FBM0 in red/alarm, off-line, not failed; and it does not even show the FBM233
- From: "Joseph M. Riccardi" <Joe@xxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 23 Jan 2013 14:40:33 -0500
Russ,
Thanks, that looks like the issue. Although I received no feedback or any
messages when I picked the Disable/Enable All Reports, when I exited and
reopened System Management, the ECB now appears but the FBM is still
red/alarm. I'll check it out in a short. Thanks for the suggestion...
Joseph M. Riccardi
386-441-0250 Office
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Boulay, Russ
Sent: Wednesday, January 23, 2013 1:37 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] System Management Display shows the FCP270/FBM0 in
red/alarm, off-line, not failed; and it does not even show the FBM233
Have you attempted from the CP level in SMDH.....Disable and then Enable All
Reports ?
Also there were QF's for this issue if CP stops reporting to smon...
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Joseph M. Riccardi
Sent: Wednesday, January 23, 2013 10:20 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] System Management Display shows the FCP270/FBM0 in
red/alarm, off-line, not failed; and it does not even show the FBM233
Folks,
We have an FCP270 that only connects to an FBM233, which interfaces to an
A-B PLC. Everything appears to be working well and data is being exchanged.
However, we just noticed recently that in the System Management Display, it
shows the FCP270/FBM0 in red/alarm, off-line, not failed; and it does not
even show the FBM233.
Any ideas why? Where does the System Management Display get its info from
on:
* Why it is "red/alarm, off-line, not failed" yet the FCP270 LED is
green/flashing?
* Why it doesn't show the FBM233, yet data is updating between the
FBM233 and the PLC? And the ECB201/202 FBM/DEV status colors are normal
green/white in FoxSelect.
We certainly would like to understand what we have and cannot afford to
reboot/update/download.
Thanks...
Joseph M. Riccardi
386-441-0250 Office
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at your
own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or
attached files, is intended solely for the individual or entity to which it
is addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then delete
this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person. This email comes
from a division of the Invensys Group, owned by Invensys plc, which is a
company registered in England and Wales with its registered office at 3rd
Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For
a list of European legal entities within the Invensys Group, please select
the Legal Entities link at invensys.com.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be
subject to the terms of any agreements between Invensys (and/or its
subsidiaries and affiliates) and the recipient (and/or its subsidiaries and
affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at your
own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
