Tim, Please refer to Helpful Hint 1035 for the solution. Regards, Rene Bakker - Invensys EMEATAC - Baarn - the Netherlands=20 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] = On Behalf Of Lowell, Tim: Sent: September 20, 2006 13:24 To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Sendmail error List, =20 Whenever I e-mail anything from my AW51G box with Solaris 8, I keep = getting a sendmail error that says "unable to qualify my own domain name (AWNAME) - using short name". =20 I looked this up on Google, and they keep telling you to put an entry in = the /etc/hosts file with the IP address and domain name, but they are = assuming that you have a valid domain name (in DNS I suppose) , which I = really don't. Has anybody figured out how to get rid of this error = message? =20 Tim Lowell Control Systems Engineer ConocoPhillips Trainer Refinery (610) 364-8362 tim.c.lowell@xxxxxxxxxxxxxxxxxx =20 =20 =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process = Systems (formerly The Foxboro Company). Use the info you obtain here at = your own risks. Read http://www.thecassandraproject.org/disclaimer.html =20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: = mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave =20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave