Re: [foxboro] RE : RE : FBM10 Communication Issue
- From: "Ken Heywood" <kheywood@xxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Tue, 24 Jul 2007 11:56:29 -0400
Actually, that's good direction. Thanks. I took them to a test bed with =
just a CP10. I built an ECB to light up the FBMs. As soon as I plugged =
the FBMs into the system, it started EPROM updates. I took them to the =
system and they work fine with the CP30. I don't understand why the CP30 =
didn't hit them, but the CP10 did. CP10 and CP30 both V6.5.3 software, =
same IOM. Who can figure? As long as it works.
Best Regards,=20
Ken Heywood=20
Process Control Services, Inc.
-----Original Message-----
From: Doucet, Terrence [mailto:tdoucet@xxxxxxxxxxxxxxxxxx]=20
Sent: Tuesday, July 24, 2007 10:17 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] RE : RE : FBM10 Communication Issue
Ken,
=20
Sorry to be short on specifics here, but I don not recall the precise =
procedure.
=20
My recollection is that you need a test bed that will boot the FBM10 and =
then have the old iom file for the FBM10 on the host of the test bed CP. =
An eeprom "update" in SMDH of the FBM10 will now actually be an eeprom =
down grade and when the eeprom success message is received, you can now =
take the FBM to your live system and it will boot.
=20
Terry
________________________________
De: foxboro-bounce@xxxxxxxxxxxxx de la part de Ken Heywood
Date: mar. 2007-07-24 10:04
=C0: foxboro@xxxxxxxxxxxxx
Objet : Re: [foxboro] RE : FBM10 Communication Issue
So the question remains, how to use a spare FBM10 in another part of the =
=3D plant when it won't communicate because it had been PROMed?
Current system version is 6.5.3 - should be the latest images.
Best Regards,=3D20
Ken Heywood=3D20
Process Control Services, Inc.
-----Original Message-----
From: Doucet, Terrence [mailto:tdoucet@xxxxxxxxxxxxxxxxxx]=3D20
Sent: Tuesday, July 24, 2007 9:51 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] RE : FBM10 Communication Issue
Ken,
=3D20
You would have to look at release notes for your current rev of the CP's =
=3D to be sure, but I think you are correct. Certain new eeprom on FBM's =
=3D will not work on CP's with older eeprom levels.
=3D20
Terry
________________________________
De: foxboro-bounce@xxxxxxxxxxxxx de la part de Ken Heywood
Date: mar. 2007-07-24 05:13
=3DC0: foxboro@xxxxxxxxxxxxx
Objet : [foxboro] FBM10 Communication Issue
I have a bunch of FBM10s that show communication failure on both A and B =
=3D fieldbus. I am assured that these were working. However, in this =
system =3D using a CP30, they fail. I do have one FBM from a different =
area that =3D works, so I know the system is okay. Is it possible that =
these failing =3D FBMs have a later EEPROM update that would make =
fieldbus communications =3D fail on earlier systems?
--------------------------------------------------------
This message (and any associated files) is intended only for the use of =
=3D the individual or entity to which it is addressed and may contain =
=3D information that is CONFIDENTIAL, subject to copyright or =
constitutes a =3D trade secret. If you are not the intended recipient =
you are hereby =3D notified that any dissemination, copying or =
distribution of this =3D message, or files associated with this message, =
is strictly prohibited. =3D If you have received this message in error, =
please notify us immediately =3D by replying to the message and deleting =
it from your computer. Messages =3D sent to and from PCS may be =
monitored.
Internet communications cannot be guaranteed to be secure or error-free =
=3D as information could be intercepted, corrupted, lost, destroyed, =
arrive =3D late or incomplete, or contain viruses. Therefore, we do not =
accept =3D responsibility for any errors or omissions that are present =
in this =3D message, or any attachment, that have arisen as a result of =
e-mail =3D transmission. If verification is required, please request a =
hard-copy =3D version. Any views or opinions presented are solely those =
of the author =3D and do not necessarily represent those of the company.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process =
=3D Systems (formerly The Foxboro Company). Use the info you obtain here =
at =3D your own risks. Read =
http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
to unsubscribe: =3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat
=3D20
=3D20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process =
=3D Systems (formerly The Foxboro Company). Use the info you obtain here =
at =3D your own risks. Read =
http://www.thecassandraproject.org/disclaimer.html
=3D20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin
to unsubscribe: =3D
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave
=3D20
=3D20
--------------------------------------------------------
=3D20
This message (and any associated files) is intended only for the=3D20 =
use of the individual or entity to which it is addressed and may=3D20 =
contain information that is CONFIDENTIAL, subject to copyright or =
constitutes a trade secret. If you are not the intended recipient=3D20 =
you are hereby notified that any dissemination, copying or=3D20 =
distribution of this message, or files associated with this =
message,=3D20 is strictly prohibited. If you have received this message =
in error,=3D20 please notify us immediately by replying to the message =
and deleting=3D20 it from your computer. Messages sent to and from PCS =
may be monitored.=3D20
Internet communications cannot be guaranteed to be secure or =
error-free=3D20 as information could be intercepted, corrupted, lost, =
destroyed, arrive=3D20 late or incomplete, or contain viruses. =
Therefore, we do not accept=3D20 responsibility for any errors or =
omissions that are present in this=3D20 message, or any attachment, that =
have arisen as a result of e-mail=3D20 transmission. If verification is =
required, please request a hard-copy=3D20 version. Any views or opinions =
presented are solely those of the author=3D20 and do not necessarily =
represent those of the company.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process =
Systems (formerly The Foxboro Company). Use the info you obtain here at =
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process =
Systems (formerly The Foxboro Company). Use the info you obtain here at =
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
=20
--------------------------------------------------------
=20
This message (and any associated files) is intended only for the=20
use of the individual or entity to which it is addressed and may=20
contain information that is CONFIDENTIAL, subject to copyright or
constitutes a trade secret. If you are not the intended recipient=20
you are hereby notified that any dissemination, copying or=20
distribution of this message, or files associated with this message,=20
is strictly prohibited. If you have received this message in error,=20
please notify us immediately by replying to the message and deleting=20
it from your computer. Messages sent to and from PCS may be monitored.=20
Internet communications cannot be guaranteed to be secure or error-free=20
as information could be intercepted, corrupted, lost, destroyed, arrive=20
late or incomplete, or contain viruses. Therefore, we do not accept=20
responsibility for any errors or omissions that are present in this=20
message, or any attachment, that have arisen as a result of e-mail=20
transmission. If verification is required, please request a hard-copy=20
version. Any views or opinions presented are solely those of the author=20
and do not necessarily represent those of the company.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
