Hi, Have you tried using a PAKIN to connect to the read addr and MCIN connected to the PAKIN? Rgds, Dirk -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of c.a.wolfschlag@xxxxxxxxxxxxxx Sent: Saturday, 21 January, 2012 13:44 To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] MCIN help Having trouble getting a MCIN block to work. Here is what I'm trying to do, I have a MDSCAN block that is reading a modbus register 30401 and I want to take the contents of the 30401register to a MCIN block. Can't seem to find the right combination to get it to work. Any help or suggestions would be greatly appreciated. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave