Re: [foxboro] Limitorque thread
- From: "Dykes, James" <James_Dykes@xxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Thu, 29 Nov 2001 09:20:03 -0600
Are there many users communicating to Limitorque via a prosoft module in
an Allen Bradley PLC-5? We just recently have started to do this and are
running into some problems with one of our installations. The problem is
random
mov's occasionally stroking closed without being issued a command. Prosoft
reviewed the ladder logic and found no issues and I/A addressing has been
reviewed for conflicts. The field communications wiring is wired per
Limitorque's
spec. Has anyone else seen similar problems?
_______________________________________
James J. H. Dykes
Ultramar Inc.
Golden Eagle Refinery
Technical Services Dept.
Process Controls Group
150 Solano Way
Martinez, Calif. 94553-1487
Phone: 925.228.1220 Ext. 2930
mailto:james_dykes@xxxxxxxxxxx
_______________________________________
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist
list info: //www.freelists.org/list/foxboro
subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » Re: [foxboro] Limitorque thread
