Ajay, Cfgpts will allow you to edit any part of a point's configuration. When you dump the existing configuration, specify a verbose output so that you= get all the fields for all points. I then import the text file into Exce= l as a comma separted file. Be careful you don't have any commas in your point descriptions. Then select the cells you want to change and use the= Replace function. When you are through with the edits, save the file as = a csv and upload it back into the historian. Cyrus Taft EPRI I&C Center Message text written by INTERNET:foxboro@xxxxxxxxxxxxx >Cfgpts only seems to be talking about adding / deleting / getting information. Will it edit the existing points dead bands, sampling period= s. Thank & Regards < _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave