QF1097849 now proc=vides a CD to use that performs the repair thru gui interface and does not require trailer or other QF media -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of William C Ricker Sent: Friday, August 31, 2012 9:28 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] InFusion 3.0 Issue the requirement is expressed in 8.6 release notes, B0700SD. quote 7.4.2 Reinstalling V8.6 Release Update after a Day 1 Process When modifying a workstation's configuration to add new components through the Day 1 process, the Day 0 CD is required. This may place out-of-date components on the workstation. Once you complete the Day 1 process, you must repair the I/A Series version 8.6 Release Update. Additionally, if you have installed any 8.6 quick fixes, you must also perform a repair on the 8.6 quick fixes. endquote The actual procedure is laid out elsewhere in the same document. William C Ricker FeedForward, Inc. -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Marc Hunter Sent: Thursday, August 30, 2012 7:43 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] InFusion 3.0 Issue Russ, Ashamed to admit, no we did not do repair procedure. Can you cite manual number that we can perform this to clean up this system? Thanks again, Marc Sent from my iPhone Marc L. Hunter Synergy On Aug 30, 2012, at 6:26 PM, "Boulay, Russ" <Russ.Boulay@xxxxxxxxxxxx> wrote: > Did you perform a repair after the commit was passed thru ?? > New rules after V8.5..... > > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx > [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Marc Hunter > Sent: Thursday, August 30, 2012 6:58 PM > To: foxboro@xxxxxxxxxxxxx > Subject: [foxboro] InFusion 3.0 Issue > Importance: High > > All, > We have InFusion 3.0 with I/A Ver 8.6 in which we performed a pass > through commit which is removing a CP that was boot host was a different AW that the galaxy repository, and adding a new CP that is boot hosted by this server. Once the pass through commit process (rev level is skipped) has completed and reboot performed, the InFusion Galaxy Repository fails to start the FRSexec.exe process, and thus deploy does not perform. In launching this executable file the deployment now works fine. > > Any idea of what happened to keep this process from running? > > Did we perform pass through commit properly? Followed typical I/A > pass through commit rules as we could not find any documentation regarding performing pass through commit on InFusion Galaxy Repository. > > Any experiences and/or notes are welcome, thanks again list!!! > > Marc L. Hunter > Synergy Systems Inc. > 1982 Ohio Street > Lisle, IL 60563 > +1 (630) 724-1960 > hunter@xxxxxxxxxxxxx<mailto:hunter@xxxxxxxxxxxxx> > [cid:image001.jpg@01CD86D8.FEA50D20] > > > > > > > ______________________________________________________________________ > _ This mailing list is neither sponsored nor endorsed by Invensys > Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > > > *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx. > > You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). > > > > > ______________________________________________________________________ > _ This mailing list is neither sponsored nor endorsed by Invensys > Process Systems (formerly The Foxboro Company). Use the info you > obtain here at your own risks. Read > http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave