Joe, RE: Wonderware Contact I do not. Sorry. The guys in the Cleveland office have done a number of WW projects. You might try there if you know anyone. :) Regards, Alex Johnson Invensys Operations Management 10900 Equity Drive Houston, TX 77041 +1 713 329 8472 (desk) +1 713 329 1600 (operator) +1 713 329 1944 (SSC Fax) +1 713 329 1700 (Central Fax) alex.johnson@xxxxxxxxxxxx (current) alex.johnson@xxxxxxxxxxxxxxxx (good until September 2010) -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Riccardi, Joseph Sent: Thursday, February 10, 2011 12:47 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] InFusion Alex, Thanks. Regarding... Re: Did anyone receive any design criteria or limitations to consider when designing and configuring your graphics [ using InFusion View]? InFusion View is simply an InTouch application running in the InTouch executable so any InTouch rules should apply. I don't know where those are - just one more thing outside my knowledge base. :( Do you have any special contact info at Wonderware that could provide these rules? Joseph M. Riccardi Senior I&C Engineer Bechtel Parsons Blue Grass Team Richmond, KY 859-626-4368 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Johnson, Alex P (IOM) Sent: Thursday, February 10, 2011 7:06 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] InFusion Re: Did anyone receive any design criteria or limitations to consider when designing and configuring your graphics [ using InFusion View]? InFusion View is simply an InTouch application running in the InTouch executable so any InTouch rules should apply. I don't know where those are - just one more thing outside my knowledge base. :( Re: Ditto for CP270 loading recommendations and limitations on InFusion (i.e., max CP % loading? are there OM List limits or a different concept?, other limits to consider, etc.). The use of the IEE has no impact on CP270 loading. The appropriate documents are: B0700AV - FCP270 Sizing Guidelines & Spreadsheet B0700AW - ZCP270 Sizing Guidelines & Spreadsheet Document and spreadsheet should be available in the normal places - FoxDoc, GCS website, ... Regards, Alex Johnson Invensys Operations Management 10900 Equity Drive Houston, TX 77041 +1 713 329 8472 (desk) +1 713 329 1600 (operator) +1 713 329 1944 (SSC Fax) +1 713 329 1700 (Central Fax) alex.johnson@xxxxxxxxxxxx (current) alex.johnson@xxxxxxxxxxxxxxxx (good until September 2010) -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Joseph M. Riccardi Sent: Thursday, February 10, 2011 11:37 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] InFusion No InFusion users on line this week? Or just no design details/recommendations forthcoming from Foxboro that anyone has received? Joseph M. Riccardi 386-441-0250 Home Office 386-451-7607 Florida Cell 440-725-4025 Ohio Cell Joe@xxxxxxxxxxxxx "To give real service you must add something that cannot be bought or measured with money; and that is sincerity and integrity." - Donald A. Adams -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Riccardi, Joseph Sent: Wednesday, February 09, 2011 12:03 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] InFusion InFusion folks, Did anyone receive any design criteria or limitations to consider when designing and configuring your graphics? A lot of the DM/FV rules for number of objects, grouping, block connections, etc. should be totally different for building InFusionView display/graphics. I cannot find anything on the web site... Ditto for CP270 loading recommendations and limitations on InFusion (i.e., max CP % loading? are there OM List limits or a different concept?, other limits to consider, etc.). Joseph M. Riccardi Senior I&C Engineer Bechtel Parsons Blue Grass Team Richmond, KY 859-626-4368 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave