Re: [foxboro] IACC Import?

  • From: "Bergeron, Normand" <normand.bergeron@xxxxxxxxxxxxxxxxxxxxxx>
  • To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
  • Date: Wed, 23 Apr 2014 17:13:47 -0500

Joe,

I believe the current version of IACC is 2.6 and you need to install QF1212056 
for Foxview/Foxdraw 10.4.1.

Regards,

Norm


_____________________________________________________________________________________

Normand Bergeron | Schneider Electric | Invensys | Canada | Spécialiste 
d'application / Application specialist
Phone: +1 514 421 4210 | Fax: +1 514 421 8054 | Mobile: +1 514 220 5081
Email: normand.bergeron@xxxxxxxxxxxx | Site: www.invensys.com | Address: 4, rue 
Lake, H9B 3H9 Dollard-des-Ormeaux, Quebec, Canada

*** Please consider the environment before printing this e-mail
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of Badura, Tom
Sent: April 23, 2014 5:55 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] IACC Import?

Joe,

IACC Ver. 2.0 is fairly old (early 2000s I believe).  It may be possible that 
this version does not support some newer parameters in blocks in an FCP at 
V8.7. We are currently at IACC 2.4 and there is a 2.5 or 2.6 out.  I know we 
had to upgrade IACC versions several times to support newer IA versions and 
hardware over the past 6 - 8 years.


Tom Badura
Plastics Engineering Company
tbadura@xxxxxxxxxx


-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On 
Behalf Of Scott, Joe
Sent: Wednesday, April 23, 2014 1:58 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] IACC Import?

IA version is 8.7 FCP270 has image 860016 IACC is 2.0.1 Joe -----Original 
Message-----

Hey List,
I have installed IACC on an HP91 Server 2003 and I'm having a issues trying to 
import a Save_all from a 8.7 FCP270. I get an error msg, Number of Parameters 
for block type XXX does not match expected number of parameters ; not available 
to import.
All ain,rins,aouts,routs,charc and pida fail , but math ,logic seq blocks load 
ok.
Any thoughts?
Thanks
In advance for your help,
Joe
PREMIER System Integrators, Inc.
[cid:image002.jpg@01CF5EFA.76DBB960]
106 Woodall Road
Decatur, AL 35601

Joe R Scott
Office 256-355-1732 Ext.154
Fax 256-355-9088




_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems 
(formerly The Foxboro Company). Use the info you obtain here at your own risks. 
Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________

*** Confidentiality Notice: This e-mail, including any associated or attached 
files, is intended solely for the individual or entity to which it is 
addressed. This e-mail is confidential and may well also be legally privileged. 
If you have received it in error, you are on notice of its status. Please 
notify the sender immediately by reply e-mail and then delete this message from 
your system. Please do not copy it or use it for any purposes, or disclose its 
contents to any other person. This email comes from a division of the Invensys 
Group, owned by Invensys Limited, which is a company registered in England and 
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 
7AW (Registered number 166023). For a list of European legal entities within 
the Invensys Group, please select the Legal Entities link at invensys.com. 
Invensys Limited is owned by the Schneider-Electric Group.

You may contact Invensys Limited on +44 (0)20 3155 1200 or e-mail 
reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject 
to the terms of any agreements between Invensys (and/or its subsidiaries and 
affiliates) and the recipient (and/or its subsidiaries and affiliates).
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts:

  1. Home
  2. foxboro
  3. Archive
  4. 04-2014