So is this the same dell hardware. Did you restore from old backup or day0 the new WP. If you fist the machine itself what gets returned? cd /opt/fox/bin/tools fist TCXP01 (use your letterbug) what info is returned -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Dimitris Legakis Sent: Friday, June 28, 2013 12:45 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] I/A series WorkStaion installation issue Thank you for this, but it is not a new WP. This WP was operating for years. A few days ago it was damaged and I replaced the computer with a brand new one. I kept the same RCNI with the same letterbug. I suppose that after the installation, it should be alive without doing anything to the AWs. In case I am wrong, please correct me or suggest me to try something. 2013/6/28 Barry Heap <barry.heap@xxxxxxxxxxxxxxxxxxxx> > Hi Dimitris, > > You need to also do a Day 1 install on the AW that has the System > Monitor that included the new WP that you just installed. > > In fact, you need to do a Day 1 install on all the stations on your > network, but especially the AWs. > > Until then you will not see Process or System buttons doing anything. > And you certainly won't see anything in the SMDH. > > Regards, > > Barry Heap > > > On 28/06/2013, at 9:30 PM, Dimitris Legakis <d.legakis@xxxxxxxxx> wrote: > > > Hi all, > > After successfully finishing the installation of a new Workstation > > (WP), the Foxview window appeared automatically after the final > > reboot of the > PC. > > > > However, the SYSTEM and PROCESS buttons appear to be green without > > flashing. After pressing on them I realised that the specific WP is > > not a part of the system yet. > > > > Note that the network connection is properly configured (proper IP, > Subnetmask, > > Foxboro Protocol installed and checked etc). Whenever I try to reach > > the other workstations of the system via windows explorer, I can > > connect without any problem. In the System manager, the workstations > > and the processors appear in grey colour and I cannot go through > > their trees > (CP--> > > FCM --> FBM --> point). > > > > Does anyone have an idea on what shall I check? > > > > thanx > > dimitris > > > > > > > > > > ____________________________________________________________________ > > ___ This mailing list is neither sponsored nor endorsed by Invensys > > Process Systems (formerly The Foxboro Company). Use the info you > > obtain here at your own risks. Read > > http://www.thecassandraproject.org/disclaimer.html > > > > foxboro mailing list: //www.freelists.org/list/foxboro > > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > > > > ______________________________________________________________________ > _ This mailing list is neither sponsored nor endorsed by Invensys > Process Systems (formerly The Foxboro Company). Use the info you > obtain here at your own risks. Read > http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please select the Legal Entities link at invensys.com. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave