Re: [foxboro] Foxview
- From: "Theobald, Martin (Cytek)" <Theom2@xxxxxx>
- To: "'Foxboro Mailing List'" <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 18 Oct 2001 15:07:25 +0100
Just had a quick experiment and "dflt" does not capture all the C:Bs used.
Where can I find a manual/description (PDF file?) for the ".g" format?
Regards,
Regards,
Martin Theobald
Applications Engineer
Tel Direct +44 (0)1324 497155
Fax +44 (0)1324 497192
Email theom2@xxxxxx
Rigidex 3 Recomputerisation
Project Aurora - Polymers
BP Grangemouth
The way I do it is to convert the display to a .g file using the Display
Converter and grep out the references to "dflt". This will give you a list
of COMP:BLOCK.PARAM connections, which you can further parse out with
various "cut" commands, or after copying to your LAN, using Excel's import
text features.
FoxView 99.2.1 also has a display connection report, under Tools, Display
Editor (Dedit), and then the Command tab, and there is a button for
"Connection Report". The output is similar to a connection report for
Display Manager.
I personally like the .g file method, because you get a more complete
picture of what is on the display. With the connection report method, if
you use any faceplate templates, you get lots of entries that say ".PNT", or
".ALMSTA", with no actual compound or block name attached. The .g file
method lists every connection, regardless of how it was built.
Tim Lowell
Control Systems Engineer
Phillips Petroleum Company, Trainer Refinery
Phone: 610-364-8362
Fax: 610-364-8211
tlowell@xxxxxxxx
-----Original Message-----
From: Scott, Walter [SMTP:wscott@xxxxxxxxx]
Sent: Monday, October 15, 2001 10:42 AM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: [foxboro] Foxview
Is there away to show the points in a Foxview display in a report
format
Walter Scott
Birmingham Water Works
wscott@xxxxxxxxx
205-254-0796
___________________________________________________________________
This list is neither sponsored nor endorsed by The Foxboro Company.
Use the information obtained here at your own risk. For disclaimer,
see http://www.thecassandraproject.org/disclaimer.html#maillist
list info: //www.freelists.org/list/foxboro
subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
