Hello list, I would recommend initially building 2 AINs. Build one with default KSCALE and BSCALE factors and then the other with the desired factors. You should be able to run a signal (I will assume 4 - 20 mA) to the input I/O point to verify that the corrected AIN output is what you want. If it looks right, you can delete the uncorrected AIN block. Bob -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Felgner, Brian Sent: Tuesday, March 08, 2011 5:51 AM To: 'foxboro@xxxxxxxxxxxxx' Subject: Re: [foxboro] Flow correction Sent from blackberry ----- Original Message ----- From: Horan, Andy [mailto:Andy.Horan@xxxxxxxxxxxx] Sent: Tuesday, March 08, 2011 05:06 AM To: foxboro@xxxxxxxxxxxxx <foxboro@xxxxxxxxxxxxx> Subject: Re: [foxboro] Flow correction Hi, An Offset and Gain factor can be incorporated in the AIN block (after signal conditioning) using the BSCALE and KSCALE parameters. See I/A document B0193AX (AIN). Andy. ________________________________________ From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Ajit.S.Kumar@xxxxxxxxxxxxx [Ajit.S.Kumar@xxxxxxxxxxxxx] Sent: 08 March 2011 09:29 To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Flow correction Hi We need to do flow correction on an AIN Block after proving the flowmeter .The Correct meter factor is 0.94977. This needs to be incorporated in the AIN loop as below . What are the best possible method ?can this be done either by calc or seq blk etc or directly in ain. xxxFIxxx Range 0-12 M3/H (AIN Blk) Thanks and best regards A.Kumar _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave The information contained in this message and any attached files may be privileged and/or confidential and protected from disclosure. If you are not the intended recipient, any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you have received this transmission in error, please so notify the sender immediately without reading it. Also, please promptly destroy the original transmission and its attachments. Any views or opinions presented in this message or attachments are those of the author and do not necessarily represent those of KapStone Paper and Packaging Corporation or its subsidiaries. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave