Re: [foxboro] Device Monitor issue

  • From: dirk.pauwels@xxxxxxxxxx
  • To: foxboro@xxxxxxxxxxxxx
  • Date: Fri, 9 Jan 2009 17:39:32 +0100

Yolanda:
Here's some more info on the cs_current file and how to get it:

      Run: "dm_recon d" to create a device status report. This report is
      created only on the station cuurently acting as Device Monitor
      Master.
      METHOD 1:

      3AWE01# cd /opt/fox/bin/tools
      glof -p DEV_MONITOR

      fist STA_LBUG   (do it for all stations with a hard drive, until you
      identify
                       the station currently as the Master)

      Another way to identify Dev Mon Master:

      3AWE01# get_host       (this is another script. It will tell you
      current Hosts)
      2AP201 = 00006CC00032
      4APB01 = 080020772F5B  -- DevMon Master
      4APB01 = 080020772F5B  -- CSA Server
      4AWB01 = Not found!
      3AWD01 = 0800209FB1C1
      3AWE01 = 0800208D59F5
      3PWE01 = 020701142EB4

      Once you identified the Device Monitor Master, create DevMon Report:

      3AWE01# rlogin 4APB01

      4APB01# cd /usr/fox/cs
      4APB01# dm_recon d
      4APB01# more cs_dm.current

      STATION:  "3COM01": STATE: OPERATIVE TYPE: COMM10
         Device: 1  "  LP01" TYPE: PRINTER  STATUS: FAIL PR  NONE
         Device: 2  "  LP02" TYPE: PRINTER  STATUS: FAIL PR  NONE
         Device: 3  "  LP03" TYPE: PRINTER  STATUS: FAIL PR  NONE
         Device: 4  "  LP04" TYPE: PRINTER  STATUS: FAIL PR  NONE

      STATION:  "3COM02": STATE: FAILED    TYPE: COMM10
         Device: 1  "  LP05" TYPE: PRINTER  STATUS: FAIL PR  NONE
         Device: 2  "  LP06" TYPE: PRINTER  STATUS: FAIL PR  NONE
         Device: 3  "  LP07" TYPE: PRINTER  STATUS: FAIL PR  NONE
         Device: 4  "  TT01" TYPE: TERMINAL STATUS: FAIL PR  NONE

      STATION:  "3AWD01": STATE: OPERATIVE TYPE: WP/AW 50/51
         Device: 1  "3AWPD1" TYPE: GRAPHICS STATUS: OK   PR  REMOTE
      '3AWPD2'
         Device: 2    ----- NOT CONFIGURED ----
         Device: 3  "  LP10" TYPE: PRINTER  STATUS: FAIL PR  NONE

      STATION:  "3AWE01": STATE: OPERATIVE TYPE: WP/AW 50/51
         Device: 1  "3AWPE1" TYPE: GRAPHICS STATUS: OK   PR  REMOTE
      '3AWPD1'
         Device: 2    ----- NOT CONFIGURED ----
         Device: 3  "  LP12" TYPE: PRINTER  STATUS: FAIL PR  NONE



      NOTE:
      Another way to create the report is by running:

      dm_recon t 3AWE01

      This will force 3AWE01 to become the Device Monitor Master.
      Create the report immediately after,

      dm_recon d
more cs_dm.current

(See attached file: get_host)

i've included the get_host script I use, you'll have to run chmod 777
get_host to get it to work

Hope this helps,

Dirk Pauwels - DCS/MOC coordinator
Engineering dept.
Hexion Specialty Chemicals
E mail: dirk.pauwels@xxxxxxxxxx
T.  +32.(0)3.570.95.97
F.  +32.(0)3.570.16.09
Mob. +32.(0)497.428.300


                                                                           
             Yolanda Dickerson                                             
             <Yolanda_Dickerso                                             
             n@xxxxxxxxxxxx>                                            To 
             Sent by:                  <foxboro@xxxxxxxxxxxxx>             
             foxboro-bounce@fr                                          cc 
             eelists.org                                                   
                                                                   Subject 
                                       [foxboro] Device Monitor issue      
             09/01/2009 17:16                                              
                                                                           
                                                                           
             Please respond to                                             
             foxboro@freelists                                             
                   .org                                                    
                                                                           
                                                                           





I'm getting a repeating error on the smon_log hosting the ATS's.  The
system monitor is operating at ver 8.3.   The device monitor is running on
a version 8.2 AW.   The error is from a ver 6.5.2 Unix box (AWF541). The
alarm is:

2009-01-09 09:54:10 AWF541 Process =  DEV_MONITOR  -39    0 DEVICE MONITOR
SLAVE STATION


I'm getting this alarm about every 2 minutes or so. Does anybody have an
idea about what is causing this error/ problem?


There are 15 ATS's all at ver 4.0.1
 Windows XP and windows server box's from ver 8.3 to ver 7.1.1
Unix boxes ver 4.3 , ver 6.1, ver 6.1.2 ver 6.2.1 ver 6.5.2, ver 7.1.1

Please  help!

Yo Dickerson
DCS Technician
Phone: (409) 723-3518
Pager: (409) 723-3800-1333
e-mail: yolanda_dickerson@xxxxxxxxxxxx



_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html

foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

Other related posts:

  • » Re: [foxboro] Device Monitor issue - dirk . pauwels