Hi Kurt Did the FoxHPC resolve your USB-AKPs configuration issue.. We have a USB-AKP project upgrade coming soon.. Can you spare us some experience resolving this issue.. Thanks in advance... God knows best.. Best Regards.. Hizamri On 11/8/2013 11:08 PM, Boulay, Russ wrote: > Are you using the FoxHPC application required to configure the USB > annunciators? > B0700FT user guide > > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On > Behalf Of Neil Martin > Sent: Friday, November 08, 2013 7:06 AM > To: foxboro@xxxxxxxxxxxxx > Subject: Re: [foxboro] Configuring USB based Annunciator on A/I 8.8 > > I am not sure if this is your problem, but everyone needs to realize that USB > Annunciator is not really standard USB, and thus it does not work when > connected to the USB ports on a RGU. At least, this was the case a few > months ago. > > > Conroe & Dayton , TX. > Conroe ph) 936-760-6205 > Dayton ph) 936-257-4212 > pager) 936-522-0052 > > > > "Pas, Kurt" <Kurt.Pas@xxxxxxxxxxxx> > Sent by: foxboro-bounce@xxxxxxxxxxxxx > 11/08/2013 07:27 AM > Please respond to > foxboro@xxxxxxxxxxxxx > > > To > "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx> > cc > "Pas, Kurt" <Kurt.Pas@xxxxxxxxxxxx> > Subject > [foxboro] Configuring USB based Annunciator on A/I 8.8 > > > > > > > Hi, > Anyone who has experianc ein teh configuration of the new USB Annunciator > panels? > Commits turns out OK and panel is alive in the System Manager. But I > cannot get the buttons to work using Foxpanels Configurator. > > If you have any idea, please advice. > > Best regards, > > Kurt > > > > > > > > > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave