Nic, Have a read of sol915 on the CSC website. It mentions 7 day hot remarries for CP270s. Sean -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Nic Glenister (CD) Sent: Friday, 28 February 2014 1:34 p.m. To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] CP fault message The same thing happens to all the CP270s at site here. If you look at your smon_log closely, you'll see that they are EXACTLY one week apart. I always assumed that this was a scheduled 7-day Hot-Remarry and that nothing could be done to stop it. Please let me know if this is not the case ... -----Original Message----- From: Johnson, Alex Sent: Wednesday, February 26, 2014 6:04 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] CP fault message You could/should have your alarm messages sent to your historian. You can review them there using any of a variety of tools from us or third-parties. The log is an alternative as mentioned. Best, Alex _____________________________________________________________________________________ Alex Johnson | Schneider Electric | Invensys | United States | System Architect - Next Generation Systems Phone: +1 713 329 8472 | Fax: +1 713 329 1700 Email: alex.johnson@xxxxxxxxxxxx | Site: www.invensys.com | Address: 10900 Equity Drive, 77041 Houston, TX, United States *** Please consider the environment before printing this e-mail -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of David Church Sent: Tuesday, February 25, 2014 11:36 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] CP fault message Every week or so I get a system alarm for a CP. When I go into SMDH it just shows the asterisk on the block. Is there a way to know what kind of alarm I'm getting? The asterisk isn't much information. I don't see anything in SAL either. David Church Cosmo Specialty Fibers NOTICE - This message and any attached files may contain information that is confidential, legally privileged or proprietary. It is intended only for use by the intended recipient. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient,be advised that you have received this message in error. Any dissemination, copying, use or re-transmission of this message or attachment, or the disclosure of any information therein, is strictly forbidden. BlueScope Steel Limited does not represent or guarantee that this message or attachment is free of errors, virus or interference. If you have received this message in error please notify the sender immediately and delete the message. Any views expressed in this email are not necessarily the views of BlueScope Steel Limited _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave